Table of Contents
Advertisement
Install user software on a Windows computer over the network
The administrator must share the PC_User_SW folder over the network before users can perform the procedure.
1 Open the Run dialog, and type the IP address or DNS server name of the imagePRESS Server.
The IP address or DNS server name must always be preceded by "\\".
2 Type the user name and password, if required.
Ask your network administrator if a password is required.
3 Copy the PC_User_SW installer package to your desktop. Running the installers from a shared drive is not
recommended, as it may cause problems with the installation.
4 Open the PC_User_SW directory.
5 Double-click the Master Installer icon.
6 Follow the on-screen instructions.
Uninstall user software on Windows
To remove user software after you have installed it on a Windows computer, use the Fiery User Software Installer.
Note: Do not attempt to uninstall user software from the Windows Control Panel.
For information, see
Modify user software from media
Installing user software on a Mac OS computer
Installation of user software on a Mac OS computer is done separately for each application.
Note the following:
•
When you initiate installation of an application, any previous version installed on the client computer is
automatically removed.
•
All applications must be from the same package of software. When you initiate installation of one application
from a package, all applications on the client computer from a different package are removed. You are prompted
to re-install the applications from the new package. If necessary, you can manually uninstall the user software
using the Fiery Software Uninstaller.
Adobe Acrobat and Enfocus PitStop, for use with Fiery Impose/JobMaster/Compose are supplied with your Fiery
Impose/JobMaster/Compose kit and are installed in a separate operation. For more information, see
ready applications
on page 23.
Note: Fiery JobMaster is distributed by EFI. Canon does not distribute the option.
Installing and uninstalling user software on a Mac OS computer can be done from the User Software DVD, over the
network, or over the Internet or your company intranet. Ask your network administrator for the IP address of the
imagePRESS Server.
Use your Internet browser to access WebTools on the Internet. For complete information about browser and system
requirements, see Configuration and Setup.
on page 10.
Utilities
Installing user software
Fiery make-
11
Advertisement
Table of Contents
