Introduction; Overview; Key Features - QDI GeniuX 4 Manual

Chapter 1
Chapter 1

Introduction

Introduction

Overview

The GeniuX 4 is a highly integrated, high performance mainboard designed for mid-range
and higher-end servers and workstations. It is centered on the Intel® 440GX AGPset and
supports two Intel Pentium® II Xeon™ processors. It supports up to 2GB of ECC memory, 6
PCI slots (1 ISA shared) and 7 cooling fans for a high reliability architecture. It also provides
advanced features such as wake -up on LAN, wake-up on internal/external modem, key-
board password power-on function and SecurityEasy function. Together with its integrated
Intel 82558 LAN and integrated Adaptec AIC-7890 Ultra 2 SCSI, you get a powerful system
for critical business server applications.

Key Features

Microprocessor
Supports all Intel Pentium® II Xeon™ processors at 400/450MHz or higher frequency
l
with 512KB/1MB/2MB L2 cache.
Supports dual Slot 2 processors.
l
Supports 100MHz host bus speed.
l
CPU core frequency = Bus speed x2, x4, x4.5, or other ratio supported by Intel.
l
The CPU core and L2 Cache voltage adjustable from 1.3V to 3.5V automatically
l
through onboard switching voltage regulator with VID(Voltage ID).
Chipset
Intel® 440GX AGPset: 82443GX, 82371EB(PIIX4E)
l
System memory
Provides four 168 pin 3.3V unbuffered DIMM sockets.
l
Supports 100MHz SDRAM memory and registered memory.
l
Supports maximun memory capacity up to 2GB.
l
SDRAM 64 bit data interface with ECC support.
l
On-board IDE
Supports two PCI PIO and Bus Master IDE ports.
l
Two fast IDE interfaces supporting four IDE devices including IDE hard disks
l
and CD-ROM drives.
Supports up to PIO Mode 4 timing.
l
Supports "Ultra DMA/33" Synchronous DMA mode, transferring data up to
l
33Mbytes/sec.
•
Integrated 16x32bit buffer for IDE PCI Burst Transfers.
Manual for GeniuX 4
Chapter 1
1