GIT G-scan3 G3 Troubleshooting Manual page 34

GIT-EZDS AFTERMARKET DISTRIBUTORSHIP MANUAL
TROUBLE SHOOTING GUIDE
② "Anti-Reverse Engineering" Lock
For the protection of GIT's proprietary right and intellectual property that are embodied to G-scan3, the
product contains the "Anti-reverse Engineering" function.
Executing a particular special function repeatedly more than 20 times without resetting communication
with the control unit by returning to the upper level menu, which is not supposed to take place under
the normal conditions, will be considered as an attempt to reverse engineer the G-scan3.
Once prompted by this warning message, please stop using the same function with the G-scan3, turn
it off immediately and then restart. The internal counter will be reset and the warning message will not
appear unless the condition is fulfilled again.
Despite such warning, if it is ignored and the function is used a couple of times more, G-scan3 finally
locks up and ceases to operate normal as shown below.
If G-scan3 is locked, it is not recoverable unless the G-scan3 base unit is returned to the authorized
local distributor.
G-scan3 needs to be examined and then unlocked by inputting the unlock code which is provided by
EZDS HQ in Korea. The process is not subject to warranty service.
th
Feb 19 , 2019
FIRST EDITION
GIT-EZDS
AFTERMARKET DISTRIBUTORSHIP MANUAL
G-Scan3 System Lock
34