stayer SCR 255 CW Operating Instructions Manual page 18

The values givenarevalid for nominalvoltages [U]230/240
V-50/60 Hz - 110/120 V - 60Hz. For lower voltage and
models for specific countries, these values can vary.
Please observe the article number on the type plata of
your machine.The trade names of the individual machines
may vary.
NoiseNibration lnformation
Noise determined according to EN 60745.
The typical sound pressure level of appliance determined
with a filter A product are: Sound pressure level 88 dB(A);
sound power level 99 dB(A). Tolerance K=3 dB.
Wear hearing protection!
Total vibration values (vector sum of three directions)
determined according to EN 60745: Sanding drywal
ah=4 m/s2, K= 1,5 m/s2.
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool
with another. lt may be used for a preliminary assessment
of exposure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for different
applications,with different accessories or poorly maintained,
the vibration emission may differ.
This may significantly increase the exposure leveloverthe
totalworking period.
An estimation of the levelof exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may
significantly reduce theexposure level over the total working
period. ldentify additional safety measures to protect the
operator from the effects of vibration such as: maintain the
tool and the accessories,keepthe hands warm, organisation
of work pattems.
6.2 EU declaration of conformity
The undersigned: STAYER IBERICA, S.A.
With address at:
Calle Sierra de Cazorla, 7
Área Empresarial Andalucía - Sector 1
28320 PINTO (MADRID)
Tel.: 902 91 86 81 / Fax: +34 91 691 86 31
CERTIFIES
That the machine:
Type: MITRE SAWS TELESCOPIC
Models: SCR 255 CW
I declare under our responsibility that the product
described under "Technical Data" is in accordance with
the following standards or standardized documents: EN
60745-1, EN 61029-1, EN 61029-2-9, EN 55014-1, EN
55014-2, EN 61000-3-2, EN 61000-3-3 according to
regulations 2006/42/CE, 2014/30/EU, 2011/65/EU.
ENGLISH
18
Ramiro de la fuente
Managing Director
18
January, 2019