stayer SCR 255 CW Operating Instructions Manual page 13

INTRODUCTION
This manual is consistent with the date of manufacture of
your machine, you will find information on the technical
data of the machine acquired manual check for updates
of our machines on the website: www.grupostayer.com
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury.
Intended Use
The power tool is intended as a stationary machine for
making straight lengthways and crossways cuts in wood.
In this, horizontal mitre angles from –52° to +60° as well as
vertical bevel angles from 47° (leftward) to 46° (rightward)
are possible.
The capacity of the power tool is designed for sawing
hardwood and softwood.
The power tool is not suitable for cutting aluminium or
other non-ferrous metals or alloys.
1. Index
2. Specific safety instructions .......................... 14
3. Instructions for commissioning ................... 15
3.1 Assembly ...................................................... 15
3.2 Illustrated description of functions ........... 15
4. Operating instructions .................................. 16
4.1 Placement and tests .................................... 16
4.2.Change of tool ............................................. 16
4.3.Operations of adjustment for use ............... 17
4.4. Start-up ......................................................... 17
5. Maintenance and cleaning instructions ...... 11
5.1 Repair service .............................................. 11
5.2 Guarantee ..................................................... 11
5.3 Elimination ................................................... 11
6. Marking Norm ................................................ 11
6.1 Technical Characteristics ........................... 11
6.2 CE Declaration of Conformity .................... 12
2. Safety Warnings for Sliding Mitre Saws
Keep your workplace clean. Blends of materials are
particularly dangerous. Dust from light alloys can burn or
explode.
- Store the machine in a safe manner when not being
used. The storage location must be dry and lockable.
This prevents the machine from storage damage, and
from being operated by untrained persons.
- Use the machine only for cutting the materials listed
under Intended Use. Otherwise, the machine can be
subject to overload.
ENGLISH
13
- Always firmly clamp the piece to be worked. Do not
saw workpieces that are too small to clamp. Otherwise,
the clearance of your hand to the rotating saw blade is too
small.
- Keep handles dry, clean, and free from oil and grease.
Greasy, oily handles are slippery causing loss of control.
- Never use the machine with a damaged cable. Do not
touch the damaged cable and pull the mains plug when
the cable is damaged while working. Damaged cables
increase the risk of an electric shock.
- Check the cable regularly and have a damaged cable
repaired only through an authorised customer service
agent for Bosch power tools. Replace damaged
extension cables. This will ensure that the safety of the
power tool is maintained.
- Do not use dull, cracked, bent or damaged saw
blades. Unsharpened or improperly set saw blades
produce narrow kerf causing excessive friction, blade
binding and kickback.
- Never operate the machine without the insert plate.
page
Without flawless insert plates, injuries are possible from
the saw blade.
- Do not use high speed steel (HSS) saw blades. Such
saw blades can easily break.
- Always use blades with correct size and shape
(diamond versus round) of arbour holes. Blades that
do not match the mounting hardware of the saw will run
eccentrically, causing loss of control.
- Make sure that the guard operates properly and that
it can move freely. Never lock the guard in place when
opened
- Operate the power tool only when the work area to
the workpiece is clear of any adjusting tools, wood
chips, etc. Small pieces of wood or other objects that
come in contact with the rotating saw blade can strike the
operator with high speed.
- Keep the floor free of wood chips and material
remainders. You could slip or trip.
- Nunca intente retirar restos de material, virutas, o
cosas similares del área de corte con la herramienta
eléctrica en funcionamiento. Antes de desconectar la
herramienta eléctrica gire primeramente el brazo de la
herramienta a la posición de reposo.
- Never remove cutting remainders, wood chips, etc.
from the sawing area while the machine is running.
Always guide the tool arm back to the neutral position first
and then switch the machine off.
- If the saw blade should become jammed, switch the
machine off and hold the workpiece until the saw blade
comes to a complete stop. To prevent kickback, the
13