Table of Contents
Advertisement
6 (2892)
Color Chart
Preparation
2892 Adjustment Program FD
2887Adjustment Program CD
DiMAGE Scan Elite 5400 II CD
Color Chart Slide (35mm)
Slide Mount Holder (SH-M20)
Microsoft Excel
Setup
1. Confirm the driver software DiMAGE Scan Elite 5400 II is launched or not.
If not installed yet, please install the driver software first.
Be sure to remove the DiMAGEScan.ini from the folder after scanning the chart.
Otherwise images will be underexposed or error message will appear when scanning
images other than the scanner gauge chart.
2. Install 2887 Adjustment Program.
Double click the Setup.exe at "CD: Scanner Gauge Chart Evaluate \DISK1 in the 2887
Adjustment Program CD. Installation will start automatically.
If 2887 Adjustment Program is launched on your computer, the above procedure is not
necessary.
Drag and copy the 90Color135.txt from the 2890 Adjustment Program FD to your
computer.
3. Load the Color Chart Slide in the Slide Mount Holder (SH-M20) so that the jig No. is
visible from the fluorescent lamp side.
Jig NO>
Advertisement
Table of Contents
