Performing The Netav Check - Sony LocationFree LF-B10 Operating Instructions Manual

Performing the
NetAV check
When the automatic NetAV check has failed, the
SETUP MODE/NET AV LED of the Base
Station lights amber. In this case, perform the
NetAV check from the [Base Station Settings]
page manually.
1
Click [NetAV Check] on the [Base Station
Settings] page.
[NetAV Check] screen appears.
[NetAV Check]
2
Click [Check].
The NetAV check starts.
If NetAV Check is incomplete
Read the instructions on the [NetAV Check] page
and configure the necessary settings.
When you watch video via the Internet, the router
must be UPnP compatible and the UPnP function
of the router must be enabled. Refer to the
Operating Instructions for your router and
confirm the settings.
If your router is not UPnP compatible, you prefer
not to use the UPnP function of the router, or if
you use the UPnP function but the NetAV check
is unsuccessful, port forwarding needs to be set
on the router.
z
• Setting port forwarding on the router requires a
• Some UPnP compatible routers are only compatible
[Check]
22
Tips
static IP address to be set in the [Internet
Connection] frame of the [Base Station Settings]
page. For details, refer to the operating instructions
for the router and "Setting a Router Incompatible
with the UPnP Function" (1 page 24).
with specific messenger services and games. For
such a router, set port forwarding.