Others; About Self-Diagnostics Displays - Sony LocationFree LF-B10 Operating Instructions Manual

Others

About Self-Diagnostics Displays

If an error occurs during use, the POWER LED on the front panel of the Base Station alerts you to the
problem. Refer to the following table for descriptions of problems and possible solutions. If the problem
persists, contact Sony LocationFree Customer Support.
Self-diagnostics LED
Base Station front
panel
WIRELESS
NETWORK
SETUP MODE/
NET AV
SETUP MODE
RESET
POWER
POWER LED on the
Base Station
Blinks red
LED
Problem
There may be a hardware malfunction
or a settings file error.
Causes and remedies
1
Turn the Base Station power off and then on
again.
2
Initialize the network and wireless settings
(1 page 33).
3
If the problem persists, contact Sony
LocationFree Customer Support.
32