Initializing The Base Station - Sony LocationFree LF-B10 Operating Instructions Manual

Initializing the Base
Station
If you initialize the Base Station, all settings are
reset to factory default.
Note
After initializing, all of the settings you made will be
deleted, including the device registration information.
z
Tip
• If you want to initialize the wireless settings,
initialize them from the Wireless Settings screen
(1 page 26 and 28) rather than initializing the Base
Station.
1
Turn off the Base Station.
2
While pressing the RESET button with a
sharp-pointed object (e.g. a pen) on the front
of the Base Station, turn on the POWER.
Hold down the RESET button until the
SETUP MODE/NET AV LED on the front
of the Base Station lights red.
Front of Base Station
RESET button
WIRELESS
SETUP MODE/
NETWORK
SETUP MODE/
NET AV
NET AV LED
SETUP MODE
RESET
33