Setup 1: Attaching The Base Station Stand - Sony LocationFree LF-B10 Operating Instructions Manual

The POWER LED on the front panel of the Base
Station lights green. Also, the SETUP MODE/
NET AV LED blinks green until an automatic
NetAV check begins.
WIRELESS
NETWORK
SETUP MODE/
NET AV
SETUP MODE
RESET
5
Check to see if the WIRELESS LED blinks
green.
6
Install the LocationFree Player on your
computer.
7
Start the LocationFree Player to make the
wireless settings of the Base Station
following the instructions of the screen of
your computer.
After making the wireless settings, restart
your Base Station.
8
Check to see if the WIRELESS LED lights
green, and then disconnect the LAN cable
from the Base Station.
9
Check to see if the NETWORK LED lights
green.
If the NETWORK LED lights green, the
connection to the wireless router is
complete. Follow the instructions on the
screen of your computer to connect to
external devices and make settings of the
LocationFree Player.
Setup 1:
Attaching the Base
Station Stand
To keep the Base Station stable, attach the Base
Station stand.
Note
Place the Base Station at least 4 inches (10 cm) away
from the wall.
Insert the claws of the stand into the holes on the
bottom of the Base Station until they click into
place. The two claws differ in size. Fit each claws
into the same sized hole.
13
Holes
Claws
Stand