Registering A Locationfree Device To The Base Station - Sony LocationFree LF-B10 Operating Instructions Manual

Registering a
LocationFree
device to the Base
Station
Registering a device by using
the SETUP MODE button
When you register a device near the Base Station,
you need to use the SETUP MODE button on the
Base Station.
1
Press the SETUP MODE button on the front
of the Base Station.
The SETUP MODE/NET AV LED starts
blinking amber.
Note
If you are using the LF-B20 in Access Point
mode, the Base Station works on the 2.4 GHz
frequency band and the settings on the sticker on
the Base Station.
2
Register your device to the Base Station by
following the descriptions of the Operating
Instructions of the device.
When you are registering a computer
installed with the LocationFree Player LFA-
PC20, refer to "Registering your computer
to another Base Station" in "Creating
Advanced Settings" in "Part 2: LocationFree
Player" for detailed instructions.
When you are registering a device other than
a computer, refer to the Operating
Instructions of the device.
Registering a device via the
Internet
When you register a device via the Internet, you
do not need to use the SETUP MODE button on
the Base Station.
Check the required information for registering a
device via the Internet. You can find the
information on the sticker attached to the "Quick
Start Guide", or in the [Base Station Settings]
page. (1 page 23)
Note
Please be sure to handle the information on the "Quick
Start Guide" with care, which is necessary for
registering your device(s) with the Base Station.
Disclosing such information to strangers may result in
allowing them to register their device(s) without your
permission.
In case you lost the "Quick Start Guide", please select
to disable Device Registration in the Base Station
settings page or change your registration password
(1 page 29).
If someone has registered his/her device with the Base
Station without your permission, please delete the
device from the list of registered devices on the Base
Station settings page (1 page 25).
1
Check the information required for the
registration.
Checking the information on the
sticker attached to the "Quick Start
Guide"
You can find a Domain Name, a Port
Number and a Registration Password on the
sticker attached to the "Quick Start Guide".
Checking the information in the
[Base Station Settings] page
You can find a Domain Name, a Port
Number and a Registration Password in
[Details needed for Device Registration via
the Internet] in the [Setting Status] screen.
(1 page 23)
17