Part 2 Attaching The Base Station Stand; Part 3 Connecting Cable Or Antenna - Sony LF-B1 Operating Instructions (LF-PK1) Operating Instructions Manual

Part 2
Attaching the Base
Station Stand
To keep the base station stable, attach the base
station stand.
Notes
• The SSID, WEP key, and initial password are
printed on the side panel of the base station. You will
need this information when you set up the base
station and make wireless connections. Install the
base station so that you can easily see the side panel.
• Place the base station at least 10 cm away from the
wall.
With the stand positioned so that the section
labeled as FRONT is toward the front of the base
station, insert the claws of the stand in the holes
on the bottom of the base station and slide the
stand toward the back of the base station to lock
it into place.
Holes
FRONT
Part 3
Connecting Cable
or Antenna
The procedure for connecting to a TV antenna
depends on the type of antenna jack.
Some antenna jacks require a separate converter
or splitter (not supplied). For more information,
contact your Sony dealer.
to antenna
Stand
Claws
7
Rear of base station
Antenna cable (not supplied)