Identifying Parts And Controls (Base Station) - Sony LF-B1 Operating Instructions (LF-PK1) Operating Instructions Manual

Locationfree player pak and locationfree base station
Hide thumbs Also See for LF-B1 Operating Instructions (LF-PK1):
Table of Contents

Advertisement

Identifying Parts and Controls
Front
Rear
qf
qd
qs

Identifying Parts and Controls (Base Station)

1 WIRELESS LED
Indicates the wireless function status.
Blue: Connected with the LocationFree device on the 5 GHz
channel.
Green: Connected with the LocationFree device on the 2.4 GHz
channel.
Turns blue or green momentarily, then turns off for 3 seconds:
Wireless is enabled, but wireless communication with a
1
LocationFree device is not taking place.
2
2 NETWORK LED
Indicates the connection status to an external network, such as the
3
Internet.
Green slow blinking: Attempting to connect.
4
Green: Connected to the network. The LED blinks quickly when
data is transmitted.
Off: Not connected.
5
3 NETAV LED
Indicates the connection status with the LocationFree device.
6
Green fast blinking: NetAV authentication has failed.
Green slow blinking: Attempting to connect with NetAV.
Green: Connected with NetAV.
Umber blinking: Updating dynamic DNS.
Umber: Dynamic DNS failure.
Off: Not connected.
Red: The base station is being initialized.
4 SETUP MODE LED (1 page 12)
Umber: The base station is in Setup mode.
Umber blinking: Easy registration is possible.
5 POWER LED (1 page 13)
Green: The power is on.
Red blinking: A malfunction has occurred.
6 POWER button (1 page 13)
Turns the base station power on and off.
7 LAN port
Connect a LAN cable.
8 BASE STATION RESET button (1 page 48)
Initializes all settings on the base station to the factory defaults.
9 SETUP MODE button (1 page 12)
Press to register LocationFree devices, or to make base station
settings.
7
0 IN 2 (AUDIO/VIDEO) terminal (1 page 9)
8
Connect audio and video cables.
9
qa DC IN jack (1 page 13)
Connect the AC power adapter (supplied).
qs VHF/UHF jack (1 page 7)
0
Connect an antenna cable.
qd IN 1 (S-VIDEO/AUDIO/VIDEO) terminal (1 page 9)
Connect audio cables and either a video or S-video cable.
qa
qf IR BLASTER port (1 page 10)
Connect the IR Blaster (supplied).
5
(Base Station)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Locationfree lf-b1Locationfree lfa-pc2

Table of Contents