Sony LF-B1 Operating Instructions (LF-PK1) Operating Instructions Manual page 53

Problem
Operations are delayed.
Cannot use NetAV.
The NetAV connection is disconnected
suddenly.
Base Station Settings (Common)
Problem
Cannot open the base station settings
screen.
Authentication of the user name and
password for opening the setup screen
fails.
Forgot the password for opening the
setup screen.
Causes and remedies
• Changing channels and operations performed from the remote control
on the screen take place via the network, so response is delayed. This is
normal and not a malfunction.
• When the rate is too high for the actual speed of your connection, delay
is even more likely to occur. Set the rate to auto or lower the rate if you
want to use manual.
Have never once been able to connect:
• Is the setting for watching TV away from home enabled? (1 page 18)
• Did you click [Connect] in the bottom left of the LocationFree Player
screen?
Can connect to the Internet from a computer at home, but
there is no picture while away from home:
• A communication connection with a download speed at least 300 kbps
is recommended. Check your communication connection.
• Is the computer you are using away from home connected to the
Internet?
• Did you click [Connect] on the bottom left of the LocationFree Player
screen?
• Has security software been installed? If so, the firewall function of the
security software may be causing NetAV to disconnect.
• Problems with the Internet connection may cause the NetAV
connection to be disconnected.
Causes and remedies
• [Base Station Settings] cannot be clicked when connecting to the base
station for the first time. Try connecting first.
• [Base Station Settings] cannot be clicked when the base station and
computer are not on the same LAN.
• If [Base Station Settings] cannot be clicked when you are using a
wireless connection, make sure the wireless network is connected to the
SSID of that base station.
• When connecting the base station to a network that requires a proxy,
click [LAN Settings] under [Local Area Network (LAN) settings] on
the [Connections] tab of [Internet Options] in Internet Explorer, then
click [Advanced] and set the IP address of the base station as an address
that does not use a proxy.
LocationFreeTV FAQ pages:
http://www.sony.com/locationfree/faq/
• If you set the wrong IP Address to your Base Station connecting with a
Wired LAN, you cannot connect to the Base Station any more. In this
case, change the settings by connecting to the Base Station directly with
wireless or, initialize the Base Station.
• Did you enter uppercase letters instead of lowercase letters, or vice
versa? The base station distinguishes between uppercase and lowercase
letters.
• Did you enter the correct user name? The user name is lfx (lowercase
letters).
• Did you enter the correct password? The default password is printed on
the label on the side of the base station.
• The default password is printed on the label on the side of the base
station.
• If you changed the password and forgot the new password, the base
station will need to be initialized (1 page 48). After initializing the
base station, enter the password printed on the label on the side of the
base station.
53