Registering Locationfree Devices On The Base Station - Sony LF-B1 Operating Instructions (LF-PK1) Operating Instructions Manual

NetAV Check
You can check whether NetAV has been set up
correctly.
1 When you click this button, a NetAV Check
page appears and the test begins. If [Success]
appears in the test page, click [Exit Setup] and
close the base station settings screen. If [Setup
Incomplete] appears in the NetAV Check
page, read the instructions on the NetAV
Check page and configure the necessary
settings.
z
Tip
When setting the dynamic DNS manually, a domain
name needs to be entered after you start the NetAV test.
Follow the on-screen instructions to enter the domain
name.
Registering
LocationFree
Devices on the
Base Station
1
Although you do not normally need to perform
the device registration procedure described below
because registration can be performed easily
from LocationFree Player (1 page 18). Perform
the following procedure if you need to enter the
registration password when you establish a
connection.
Device Registration
You can register or delete another computer or
LocationFree TV monitor equipped with a device
registration function on the base station.
You can register up to four devices. The following
types of devices can be registered.
• Computer with LocationFree Player installed
• LocationFree TV monitor equipped with a
device registration function (optional)
z
Tip
Before starting the registration (1 page 12),
configure the device you are registering so that it is
able to connect with the base station.
Note
It is not possible to watch TV or video on more than
one of the registered computers, or monitors at the
same time. (At any one time, only one of the devices
may view video.)
41