Step 1 Setup To Watch Tv At Home - Sony LF-B1 Operating Instructions (LF-PK1) Operating Instructions Manual

STEP 1
Setup to Watch TV at Home
This section describes the setup for using NetAV to watch TV and videos at home.
STEP 1-1
Turn on the base station
Connect the Power Cord to the Base
Station
Connect the power cord after you finish making
all other connections.
Base station rear panel
AC-LX1B AC power
adapter (supplied).
Wall outlet
Connect the power cord to the base
station AC power adapter (AC-LX1B), and
the AC power adapter to the DC IN jack on
the base station, then plug the power cord
into a wall outlet.
Notes
• Use only the supplied AC power adapter
(AC-LX1B).
• Do not bundle the base station AC power adapter
cord and the antenna cable together. It could
cause interference while watching TV.
To DC IN
Power cord (supplied)
13
Turn on the Base Station Power
Press the POWER button on the front panel of the
base station to turn it on.
The POWER LED on the front panel of the
base station lights green.
POWER
LED