Setting Up To Watch Tv Away From Home - Sony LF-B1 Operating Instructions (LF-PK1) Operating Instructions Manual

1 Select whether to assign an IP address to the
base station automatically, using the DHCP
function of your router or modem, or to assign
an IP address manually.
If you select [Auto (DHCP)], the router's
DHCP server will automatically assign the [IP
address], [Subnet mask] and [Default
gateway].
If you select [Manual], contact your
contracted ISP to assign the proper values in
the [IP address], [Subnet mask], [Default
gateway] and [Host name] fields.
At the time of purchase, this item is set to
[Auto (DHCP)].
2 Enter an IP address.
3 Enter a subnet mask.
4 Enter a default gateway.
5 Enter a host name for the base station, as
required.
z
Tip
The host name can be specified only when
[Automatic IP Address Configuration] is
selected.
6 The base station's MAC address for the wired
LAN appears.
7 Depending on the operating environment, the
domain name appears.
8 Select this if you want to assign the DNS
server automatically. The DNS server is only
assigned automatically if "Automatic IP
Address Configuration (DHCP)" is set for the
IP address.
This button is selected at the time of purchase.
9 Select this if you want to assign the DNS
server manually.
If you select this button, enter the addresses of
your ISP's DNS servers in the [DNS1] and
[DNS2] fields.
0 Click this to save changes.
Setting Up to Watch
TV Away From
Home
You do not need to configure the settings on
pages 38 to 41 if you performed the easy setup
(1 page 18 to 20).
This section explains how to make advanced
settings for using the NetAV function.
NetAV Settings
Set the port of the base station when the NetAV
function is to be used.
1 If there are multiple base stations and 5021 is
already being used, change the port number of
the NetAV server.
You can specify port numbers in the range
5021 to 5999.
At the time of purchase this item is set to 5021.
2 Click this to save the changes.
Setting a Router Incompatible with
the UPnP Function
When port forwarding needs to be set on the router,
follow the procedure below to set the base station's
IP address.
z
Tip
The IP address, subnet mask, and default gateway used
in the procedure below are only examples. Before you
configure these settings, check the IP address settings
of the router.
38
1
2