List Of Pictograms Used; Introduction; Intended Use; Parts Description - Silvercrest SHTK 2000 C1 Operating Instructions And Safety Advice

Introduction

List of pictograms used:

Read the instructions!
Observe the warning and safety
instructions!
Safety class II
Never allow children near the pack-
aging material or product unattended.
Ionic Hairdryer SHTK 2000 C1
Introduction
Congratulations on the purchase of your
new product. In doing so you have chosen
a top-quality product. Please make your-
self familiar with the hairdryer before preparing it
for use or using it for the first time. To do so, please
carefully read the following operating instructions and
the important safety information. Use the hairdryer
only as described and only for the stated areas of
application. Keep these instructions in a safe place.
If you pass the hairdryer on to anyone else, please
ensure that you also pass on all the documentation.

Intended use

The hairdryer is intended to be used for drying and
styling your hair. Do not use the hairdryer for drying
artificial hair. The hairdryer is only intended for pri-
vate use and not for commercial purposes. Any use
other than that described here, or any modification to
the hairdryer, is not permitted and could lead to in-
jury and / or damage to the hairdryer. The manufac-
turer accepts no liability for any damage caused by
improper use. The hairdryer is not intended for
commercial use.
30 GB/MT
Potential of serious to fatal injuries.
Dispose of packaging and
device in an environmental-
ly-friendly way!
This device must not be used
near to water or in water (e.g.
in a wash basin, or in the shower
or bath).

Parts Description

Styling nozzle
1
Air outlet opening
2
Air inlet openings
3
Cable feed button
4
Removable filter
5
Internal removable filter
5 a
Retractable power cable
6
Hanging loop
7
Switch for fan levels with 2 settings
8
Switch for heat levels with 3 settings
9
Cold air button (cool shot)
10
Diffuser
11

Scope of delivery

1 Ionic Hairdryer
1 Styling nozzle
1 Diffuser
1 Set of instructions for use

Technical Data

Mains voltage: 220–240 V∼ 50 / 60 Hz
Power input: 2000 W
Protection class: II /