Operation; Drying And Styling Your Hair; After Use - Silvercrest SHTK 2000 C1 Operating Instructions And Safety Advice

Operation / After use

Operation

Note: When the hairdryer is used for the first time,
you may notice a slight smell, which will however
disappear after a short time.
Note: The hairdryer switches off automatically for
your safety if it overheats. Remove the mains plug
from the mains socket and allow the hairdryer to
cool down. Before you switch it on again, check the
air inlet openings , the air outlet opening
3
the filters , for any blockages (e.g. sucked-in
5 5 a
fluff, dust, hair).
Switching on:
Switch on the hairdryer by pressing the switch
for the fan levels
8
Fan levels
Hairdryer is not on
low airflow
1
strong airflow
Using the heating level switch
desired heating level.
Heating levels
cool air flow
low temperature
high temperature
Dry and / or style your hair however you wish.
Switching off:
Switch off the hairdryer by setting the switch
for the fan levels
8
Cold air function:
The cold air function is designed for final styling. It
cools your hair down and fixes it for a better result.
Switch on the hairdryer by pressing the switch
for the fan levels
6
Activate the cold air function by keeping the
cold air button
Release the cold air button
turn to the previously selected heating level.
34 GB/MT
2
. Choose between:
select the
9
to position "0".
.
pressed.
10
again to re-
10
Ionisation function:
This hairdryer is fitted with an integrated ionisation
function. While hair is being dried using a haird-
ryer, it may sometimes become static and begin to
‚fly away'.
The ionisation function ensures that static electricity
in the hair is neutralised and eliminated. The hair
will be soft, smooth, shiny and easier to style.
Note: To achieve the best results with the ionisation
and function, use the hairdryer without attachments

Drying and styling your hair

To quickly dry your hair, switch the hairdryer to
a higher airflow and heating level for a shorter
period of time. After drying your hair, switch
the hairdryer to a lower airflow and heating
level to style your hair.
You can use the enclosed styling nozzle
aim the airflow in the required direction for styl-
ing. Place the styling nozzle
dryer so that it clicks into place and fits securely.
If you would like to dry your hair in a way that
is not too intense or for "air-dried perms", use
the diffuser
the styling nozzle
on it so that it clicks onto it and fits securely.
Before you comb your hair, leave it to cool down
for a short period of time so that the hairstyle
remains the same.
To cool your hair, you can use the
button or level I of heating levels
10

After use

Note: Keep the appliance in a dry place and out
of the reach of children.
Note: You can hang up the hairdryer by the hang-
ing loop on a hook.
7
Remove the mains plug from the mains socket
after each use.
Allow the hairdryer to cool down.
Remove the cable by pressing the
feed button
cable is not twisted.
6
on top of the hair
1
. For these purposes, firstly remove
11
and place the diffuser
1
. Please ensure that the mains
4
, .
1 11
to
1
11
cold air
.
9
cable