Fuel Pressure Regulator - Mercury MerCruiser Service Manual

11. Install the top cover screws and hand-tighten.
12. Verify that the top cover is not bound and pull the cover gently into place with the top
IMPORTANT: Be sure to tighten the top cover screws evenly when pulling the top cover
down into place.
13. Torque top cover screws.
Description
Top cover screws

Fuel Pressure Regulator

1. Insert the fuel pressure regulator into the top cover with the hose barb facing the
2. Install the (2) pressure regulator screws and torque to specification.
90-865376 NOVEMBER 2004
Carefully lower the top cover with fuel pumps into the Cool Fuel Module housing.
b
d
a - Cool Fuel Module housing
b - Top cover
cover screws.
outboard side of the Cool Fuel Module.
b
a - Fuel pressure regulator screws (2)
b - Fuel pressure regulator
Gen III Cool Fuel Module Assembly and Installation
c
c -
d -
a
a
c
c -
a
low-pressure pump
High-pressure pump
Nm lb. in.
14 124
8805
Fuel pressure regulator vacuum
hose barb
lb. ft.
Page 2B-7