Battery Charging - GE Druck ADTS 542F Safety And Installation Manual

Chapter 2. ADTS Touch
immediately with soap and water. If electrolyte comes into contact with the eyes, wash the
eyes thoroughly with water and consult a doctor immediately.
The ADTS5xxF, ADTS Touch and ADTS Touch-ER contain a Lithium-ion coin cell. This coin cell
is not user replaceable. Installation and replacement shall only be performed by trained
personnel.
Always dispose of batteries safely and in accordance with local instructions.

2.3 Battery Charging

The battery in the ADTS Touch can be charged using one of the following methods:
• By placing the ADTS Touch onto a powered ADTS.
• By connecting the ADTS Touch connector (4) (see Figure 2-3) to the ADTS using the
umbilical cable.
• By using the AATOUCH-5 optional accessory desktop charger. The battery must be
removed from ADTS Touch when it is charged by the AATOUCH-5 desktop charger.
• Using a universal power supply unit connected to the ADTS Touch using an adapter:
Figure 2-5: Universal Power Supply Unit and Adapter
The ADTS Touch universal power supply and the desktop charger are both rated for indoor
use only.
10 | ADTS Safety and Installation Guide-English © 2014 General Electric Company – All rights reserved.