Adts Touch - GE Druck ADTS 542F Safety And Installation Manual

2. ADTS Touch

The ADTS Touch is used to control all required functions. The ADTS Touch can be positioned
on the ADTS or used as a hand held mobile unit via a cable or Bluetooth® wireless technology.
The ADTS Touch will have power applied when:
• Positioned (docked) (1) on a powered-on ADTS.
• Using an umbilical cable connected to a powered-on ADTS.
• Powered from its own battery pack.
• Powered from a universal power supply unit
The ADTS Touch is equipped with an On/Off switch (2) and USB connectors for connection to
a PC or mass storage device (3).
Figure 2-2: Touch On/Off Switch and USB Connectors
© 2014 General Electric Company – All rights reserved.
Figure 2-1: ADTS Touch Docking Connector
2 3
1
ADTS Safety and Installation Guide-English | 7