Fluke i6000s Flex Series Instruction Sheet page 2

•
Wear protective clothing and gloves as
required.
•
Do not install this product on live conductors.
Always de-energize the circuit under test
before installing the flexible measuring head.
•
Always inspect the electronics unit,
connecting cable, and flexible measuring head
for damage before using the Probe.
•
Do not use the Probe if damaged.
•
Always connect Probe to display device
before installing the flexible measuring head.
•
Never change batteries while measurement
head is installed on conductor.
•
Use only the provided original or specified
accessories.
•
Adhere to local and national safety codes.
Individual protective equipment must be used
to prevent shock and arc blast injury where
hazardous live conductors are exposed.
•
CAT III equipment is designed to protect
against the transients in the equipment in
fixed equipment installations, such as
distribution panels, feeders and short branch
circuits, and the lighting systems in large
buildings.