Factory Reserved (J27); Ps/2 Keyboard & Ps/2 Mouse Connectors; Usb0/Usb1 Port Connectors; Com1 Connector - Shuttle ME62 User Manual

Factory Reserved (J27)

8
Open (Default)
PS/2 Keyboard & PS/2 Mouse Connectors
9
Two 6-pin female PS/2 keyboard & Mouse
connectors are located at the rear panel
of the mainboard. Depending on the com-
puter housing you use (desktop or
minitower), the PS/2 Mouse connector is
situated at the top of the PS/2 Keyboard
connector when the mainboard is laid into
a desktop, as opposed to a minitower
where the PS/2 Mouse connector is lo-
cated at the right of the PS/2 Keyboard's.
Plug the PS/2 keyboard and mouse jacks
into their corresponding connectors.

USB0/USB1 Port Connectors

10
Two female connectors USB0/USB1 share
the same USB (Universal Serial Bus) bracket
at the rear panel of your mainboard. Plug
each USB device jack into an available
USB0/USB1 connector.

COM1 Connector

11
This mainboard can accommodate one
serial device on COM1.
Attach a serial device cable to the DB9
serial port COM1 at the back panel of
your computer.
PS/2 Mouse
PS/2 keyboard
USB1
USB0
COM1
- 34 -