Finn HydroSeeder TITAN280 Parts And Operator's Manual
  1. Manuals
  2. Brands
  3. Finn Manuals
  4. Farm Equipment
  5. HydroSeeder TITAN280
  6. Parts and operator's manual

Finn HydroSeeder TITAN280 Parts And Operator's Manual

Hide thumbs Also See for HydroSeeder TITAN280:
Table of Contents

Advertisement

Quick Links

Download this manual
Activate
Your Warranty
By Registering
TODAY!!!
9281 LeSaint Drive • Fairfield, Ohio 45014
Phone (513) 874-2818 • Fax (513) 874-2914
Sales: 800-543-7166
TITAN280/TITAN330/TITAN400
HydroSeeder
®
Parts and Operator's Manual
Model SB
Serial No. _____________
LBTITAN280-TITAN330-TITAN400-SB

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HydroSeeder TITAN280 and is the answer not in the manual?

Questions and answers

Related Manuals for Finn HydroSeeder TITAN280

Summary of Contents for Finn HydroSeeder TITAN280

  • Page 1 Activate Your Warranty By Registering TODAY!!! 9281 LeSaint Drive • Fairfield, Ohio 45014 Phone (513) 874-2818 • Fax (513) 874-2914 Sales: 800-543-7166 TITAN280/TITAN330/TITAN400 HydroSeeder ® Parts and Operator’s Manual Model SB Serial No. _____________ LBTITAN280-TITAN330-TITAN400-SB...
  • Page 2 NOTES...
  • Page 3 IF FINN CORPORATION DOES NOT HAVE YOUR COMPLETED REGISTRATION FORM ON FILE, YOUR WARRANTY CLAIM WILL BE DENIED. Once your Finn equipment has been registered, your Finn Limited Warranty will be activated per the warranty statement on the other side of this notice.
  • Page 4 (except those referred to herein) that are manufactured any representation or promise on behalf of Finn Corporation or to by Finn to be free from defects in material and workmanship for a modify the terms or limitations of this warranty in any way.

  • Page 5: Table Of Contents

    Definition of Hydroseeding ........6 The Finn HydroSeeder® & How It Works ......6 Mounting The HydroSeeder®...
  • Page 6 INDEX CONTINUED CLEANING AND MAINTENACE Cleaning and Maintenance ........28-31 After First 4-8 Hours of Operation.

  • Page 7: Safety First

    SAFETY FIRST With any piece of equipment, new or used, the most important part of its operation is SAFETY! Finn Corporation encourages you and your employees to famil- iarize yourselves with your new equipment and to stress safe operation. The first five pages of this manual are a summary of all the main safety aspects associated with this unit.

  • Page 8: Safety Summary Section

    Practice all other usual and customary safe working precautions; and above all, remember that safety is up to you. The FINN HydroSeeder® is designed to mix and apply water, seed, fertilizer, agricultural lime and hydrau- lic mulch to the prepared seedbed. The resultant slurry from mixing one or more of the above materials may react causing harmful or deadly gasses within the tank.
  • Page 9 operate on a slope or a hill that may endanger the 2. Never engage the clutch driver and/or the operator(s). All personnel should when both the recirculation review and be familiar with stop/start signals between and discharge valves are the driver and operator(s) before going into operation. closed.
  • Page 10 29 CFR 1910.146. including the following: 9. It is recommended that only authorized genuine FINN Drain, flush and ventilate tank interior. replacement parts be used on the machine. Turn off engine and disconnect battery cables and perform lockout/tagout procedures.
  • Page 11 CURRENT SET OF SAFETY DECALS...

  • Page 12: Operation & Maintenance

    THE FINN HYDROSEEDER® AND HOW IT WORKS: The Finn HydroSeeder® will apply seed, fertilizer and/or lime, wood fiber mulch, or stabilizing materials in any prescribed or desired combination. The materials placed in the HydroSeeder® slurry-tank are mixed with water and kept in suspension by a dual agitation process, recirculation of slurry and mechanical agitation, thus forming a slurry that is pumped to the discharge assembly and directed onto the seed bed by the operator.

  • Page 13: Truck Mounting Calculations

    TRUCK MOUNTING CALCULATIONS: (WB x FL) – (WB x FE) = G WB x (RE + HW -RL) = G G + C must be equal to or less than CA (WB x FE) + (G x HW) = FL (WB x RE) + HW x (WB –...

  • Page 14: Attachments

    Place hard wood spacers along the length of truck rails or use Finn Spring Mounting Kit (#011562) or equivalent, also 2 spring kits are required for the TITAN400.

  • Page 15: Pre Start Check

    NOTE: For remote pump on/off control, the clutch cylinder must be connected to an air supply. 5. Air Flush System. The air flush option uses compressed air to purge any remaining mulch slurry from the HydroSeeder ® hose, the discharge boom and the recirculation piping. To maximize performance, all dis- charge plumbing should be purged after every load.

  • Page 16: Two Valve Operation

    TWO VALVE OPERATION: ® This HydroSeeder is equipped with two independently operated ball valves to control slurry flow. One is located in the recirculation line below the platform, and the other is located in the discharge line above the plat- form.

  • Page 17: Discharge Through Boom

    1. DISCHARGE THROUGH BOOM: Flow is through boom with no flow through closed recirculation valve (Figure 5). Flow through boom is con- trolled by engaging and disengaging slurry pump clutch. Do not use the discharge valve to control distance. Valve should be completely open. Control the spray volume and spray distance by adjusting the engine RPM. CLOSED POSITION FLOW...

  • Page 18: Starting Procedure

    STARTING PROCEDURE: CAUTION: See safety section of the manual (pages 2-4) before operating the ma- chine. Before starting, open the recirculation valve, close discharge valve and remote valve (if applicable), disengage clutch, and place the agitator control in the neutral position. 1.

  • Page 19: Faceplate

    FACEPLATE The keypad on the PowerView is a capacitive touch sensing system. There are no mechanical switches to stick or wear out. It operates in extreme temperatures, with gloves, through ice, snow, mud, grease, etc. When the key is touched, feedback is provided by flashing the screen. The keys on the keypad perform the following functions (refer to Figure 7): Menu Key The Menu Key is used to either enter or exit the menu screens.

  • Page 20: Stored Fault Codes

    Stored Fault Codes The PowerView Display will store any fault codes GO TO 4-UP DISPLAY generated by the engine and display them along with ENGINE CONFGURATION STORED FAULT CODES a text description. To access these fault codes: ADJUST BACKLIGHT ADJUST CONTRAST 1.
  • Page 21 ® The following tables show loading versus coverage rates for the Finn HydroSeeder . Table A shows rates for ®...

  • Page 22: Tank Capacity Chart

    Top of Load Hatch TITAN280 Gallons in. (cm) from in. (cm) from 2750 Gallons (Liters) top of load hatch bottom 10400 Liters 2750 (10410) 9 (22.9) 58.5 (148.6) 2700 (10220) 12.75 (32.4) 54.75 (139.1) 2600 (9840) 14.75 (37.5) 52.75 (134) 2500 (9465) 16.5 (41.9) 51 (129.5)
  • Page 23 TITAN400 Gallons in. (cm) from in. (cm) from (Liters) top of load hatch bottom 3975 (15045) 9 (22.9) 58.5 (148.6) 3900 (14762) 10 (25.4) 57.5 (146.1) 3800 (14383) 11.5 (29.2) 56 (142.2) 3700 (14005) 12.5 (31.8) 55 (139.7) 3600 (13626) 14 (35.6) 53.5 (135.9) 3500 (13248)

  • Page 24: Notes

    NOTES...

  • Page 25: Loading (For Wood Fiber Mulch)

    G. Replace nozzle and gasket in discharge boom. 4. Continue filling tank with water. 5. Increase engine speed to full RPM. Governed speed of the engine on the Finn HydroSeeder® should be 2,550 to 2,600 RPM under load. 6. Start loading dry material, loading the lightest material first. Agitator control should be in full mix for mixing.

  • Page 26: Prior To Application

    C. Fertilizer - Stand over hatch opening and drop the bag onto the bag cutter. Grasp both ends of the bag and dump material. D. All other additives - Consult with manufacturer for proper loading technique. 7. When all materials are loaded and in suspension, and the tank is full, move the agitator to neutral then full speed spray to insure all material is mixed.

  • Page 27: Application Of Slurry

    APPLICATION OF SLURRY: I. GENERAL APPLICATION TECHNIQUES DANGER: Do not spray toward power lines, transformers or other high voltage con- ductors. CAUTION: The driver of the carrying vehicle should remain alert for hazards to the operator, such as low power lines, hanging branches, etc. Driver should never start or stop abruptly.

  • Page 28: Pump Take-Off System Or Hose Reel W/Remote Valve

    A. PUMP TAKE OFF SYSTEM OR HOSE REEL WITH REMOTE VALVE : 1. Open recirculation valve and close discharge valve and close remote valve at the end of the hose. 2. Engage clutch. When stream is flowing freely through the recirculation line, open the pump take off valve.

  • Page 29: Hose Work W/Radio Remote

    C. HOSE WORK WITH RADIO REMOTE: 1. Begin with the engine around 1/4 throttle (1,400 RPM). 2. Close recirculation valve. If using an extension hose connected to the discharge boom, open the dis- charge valve. If using the hose reel, close the discharge valve and open the pump take off valve to the hose reel.
  • Page 30 PROCEDURE: 1. With clutch disengaged and agitator control in neutral position, start engine and allow it to warm up (see starting procedure on page 14). 2. Start filling the unit with water. When water reaches the top of the agitator shaft move agitator con- trol to approximately 1/2 speed mix.
  • Page 31 A. As the slurry level drops in the tank, slow the lower agitators, and turn off the 3rd agitator. B. Add 2 or 3 ounces (4 to 6 cl) of an antifoaming agent to the tank. C. If you can determine which additive is causing the air problem, either add it last or not at all. D.

  • Page 32: Troubleshooting Your Hydroseeder

    4. Obstruction in the sump area, which is located at the bottom of the tank on the inside where the suc- tion pipe is attached: A. The easiest way to clear the sump is to back flush through the discharge plumbing with the water supply hose.
  • Page 33 ® TROUBLESHOOTING YOUR HYDROSEEDER Problem Probable Causes Suggested Solutions Pump loses prime - lacks Too much agitation Slow the agitator distance - leaves excessive Pump worn See pump manual amount in tank (100 gal Suction partially plugged Clean out machine see pages 26-27 (378 liters) or more) Nozzle worn or plugged Clean nozzles, replace if necessary...

  • Page 34: Cleaning And Maintenance

    ® TROUBLESHOOTING YOUR HYDROSEEDER Problem Probable Causes Suggested Solutions PUMP CONT'D: Will not turn Frozen Warm housing to melt ice Jammed with fertilizer or lime Remove cover and clean interior Impeller rusted to suction cover plate Pull cover and remove rust CLEANING AND MAINTENANCE: AFTER FIRST 4 - 8 HOURS OF OPERATION: 1.

  • Page 35: Seasonal And Winter Storage Maintenance

    12. Add fuel stabilizer to fuel tank. HYDRAULIC SYSTEM: The hydraulic system on your Finn HydroSeeder® is designed to give trouble free service, if maintained. The most important areas of maintenance are the hydraulic oil and filtration. The reservoir holds 60 gallons of Mobil DTE-13M or equivalent hydraulic oil.

  • Page 37: Lubrication Chart

    LUBRICATION CHART Ref. No. Location Lubricant Frequency Number Check Clutch Lever Bearings Weekly Grease Agitator Shaft Bearings Daily Check Fuel Level Daily Grease Discharge Swivels Daily Check Engine Oil Level Daily Check Engine Oil and Filter See Engine Manual Grease Pump Bearings See Pump Manual Check Hydraulic Fluid Level Weekly...

  • Page 38: Notes

    NOTES...
  • Page 39 TITAN280/TITAN330 TITAN400 HydroSeeder ® Parts Manual Model SB...

  • Page 40: Notes

    NOTES...

  • Page 41: Pictorial Reference

    PICTORIAL REFERENCE CONTROLS (Pages 54-55) CLUTCH (Pages 56-57) STRUCTURE & RAILING TITAN280 CONTROL BOX TITAN330 TITAN400 WIRING (Pages 36-37) (Pages 58-59) HATCH VIEW (Pages 38-39) AGITATOR & SEAL ASSY. (Pages 60-61) HYDRAULIC SYSTEM (Pages 62-63) HYDRAULIC AGITATOR DRIVE (Page 64-65) ENGINE RADIATOR (Pages 42-43) CLUMP, PIPING...
  • Page 42 SEE FUEL TANK DETAIL (On Page 45) SEE POLY HATCH DETAIL WHEN ORDERING PARTS, BE SURE TO STATE SERIAL NUMBER OF MACHINE...
  • Page 43 STRUCTURE & RAILING TITAN330/TITAN400 Ref. No. Part Number Description No. Req’d 012919 Rear Right Corner Rail F400-0015 Long Rear Toe Rail 012771 Hand Rail 012918 Rear Guard Rail F400-0012 Left Corner Rear Toe Rail 012700 Swing Gate Weldment 012917 Rear Corner Guard Rail F400-0013 Left Rear Toe Rail 012912...
  • Page 44 WHEN ORDERING PARTS, BE SURE TO STATE SERIAL NUMBER OF MACHINE...

  • Page 45: Hatch View

    HATCH VIEW Ref. No. Part Number Description No. Req’d 012909 Hatch Lid Weldment 070627 Lid Hinge Weldment 012903 Hatch Liner Weldment 012938 Safety Cross Strap Weldment 012834 Bag Cutter Stainless 002909 Handle 005433 Latch WHEN ORDERING PARTS, BE SURE TO STATE SERIAL NUMBER OF MACHINE...
  • Page 46 WHEN ORDERING PARTS, BE SURE TO STATE SERIAL NUMBER OF MACHINE...

  • Page 47: Discharge Boom Assembly

    DISCHARGE BOOM ASSEMBLY TITAN280/TITAN330/TITAN400 Ref. No. Part Number Description No. Req’d 012898 3” Discharge Boom Assembly 12900-01 Boom Stand Pipe 012896 Upper Boom Discharge Weldment 012897 Lower Boom Discharge Weldment 013016 Titan Boom Handle 012888 3" Straight Swivel 013043 3" Swivel Repair Kit 011914 Black Knob/Set Screw 012886...
  • Page 48 BRACKETS LOCATED BEHIND RADIATOR FOR RADIATOR PARTS REFER TO PAGES 44-45 WHEN ORDERING PARTS, BE SURE TO STATE SERIAL NUMBER OF MACHINE...

  • Page 49: Engine & Radiator

    ENGINE & RADIATOR Ref. No. Part Number Description No. Req’d 012882 Cummins Tier III Engine 012883 Cummins Coolant System F260-0032 Top Engine Sheet Metal 012893 Eaton Load Sense Pump F260-0039 Oil Filler Door F260-0040 Hinge Spacer 055669 Door Positioning Hinge 023906 Rear Engine Sheet Metal 023907...
  • Page 50 WHEN ORDERING PARTS, BE SURE TO STATE SERIAL NUMBER OF MACHINE...

  • Page 51: Radiator Parts

    RADIATOR PARTS Ref. No. Part Number Description No. Req’d CUM11000378 90º Elbow Fitting CUM80000207 Hose Clamp CUM50000491 3/4" Heater Hose CUM50000499 3/8" Heater Hose (Not Shown) CUM110000827 Fan Guard CUM10000737 Blower Fan CUM3910128 Spacer CUM50000887 Large Charge Air Cooler Tube CUM50000437 Charge Air Cooler Hose 3"...
  • Page 52 WHEN ORDERING PARTS, BE SURE TO STATE SERIAL NUMBER OF MACHINE...

  • Page 53: Engine Wiring Diagram

    ENGINE WIRING DIAGRAM Ref. No. Part Number Description No. Req’d 170122 50 Pin Deutsh Contact 170121 Deutsh Socket Size 20 170124 Sealing Contacts Size 20 190243 18-2 Can Bus Cable 4ft. 190242 20-4 Conductor Cable 4ft. 053042 Deutsch Receptacle 170111 Deutsch Sockets 012982 Coolant Wire Harness...
  • Page 54 WHEN ORDERING PARTS, BE SURE TO STATE SERIAL NUMBER OF MACHINE...

  • Page 55: Clump, Piping & Discharge Assembly

    CLUMP, PIPING & DISCHARGE ASSEMBLY Ref. No. Part Number Description No. Req’d 011727-09 Recirculation Nozzle 011727-10 Recirculation Connector 011727-11 Recirculation Connector 012316 Flange Gasket 012385 6" Victaulic Elbow 012726-03 Recirculation Pipe 012976 Slurry Pump 012900-05 Suction Pipe 012901 1-1/4" Stainless Steel Ball Valve 012902 3"...
  • Page 56 WHEN ORDERING PARTS, BE SURE TO STATE SERIAL NUMBER OF MACHINE...

  • Page 57: Pump Assembly

    PUMP ASSEMBLY Ref. No. Part Number Description No. Req’d 012976-1 Casing w/Wear Pad 4x3x13 012976-1A Casing Gasket 012976-1C Casing Stud 012976-1B Casing Nut 012976-1E Casing Wear Pad 4x3x13 012976-1D Wear Pad (Includes stds, nuts & Gasket) 012976-2 Impeller 4x3x13 Open 012976-2A Impeller Seal 012976-5A...
  • Page 58 Ref. WHEN ORDERING PARTS, BE SURE TO STATE SERIAL NUMBER OF MACHINE...

  • Page 59: 2Nd Discharge Boom Assembly-Optional

    2ND DISCHARGE BOOM ASSEMBLY-OPTIONAL Ref. No. Part Number Description No. Req’d 012900-04 Long Boom Connector Pipe 012902 3" Stainless Steel Ball Valve 012921 LH Discharge Valve Stand Pipe 002438 3" Victaulic Clamp 002868 3" Victaulic Elbow 080666-04 Suction Valve Pipe (GOE, TOE) 080739 Discharge Valve WHEN ORDERING PARTS, BE SURE TO STATE...
  • Page 60 VIEW A SEE CLUTCH PARTS ON PAGES 56-57 VIEW A WHEN ORDERING PARTS, BE SURE TO STATE SERIAL NUMBER OF MACHINE...

  • Page 61: Controls

    CONTROLS Ref. No. Part Number Description No. Req’d 013022 Handle Extension 013022-02 Top Seal 013022-03 Bottom Seal 012957 Foot Pedal Weldment F400-0035 Control Box Mount 012939 TITAN400 Control Box 013026 Clutch Lever Mounting Weldment 006737 Ball Joint (Not Shown) 012780 Clutch Rod Assembly (Not Shown) F330-0075 Nozzle Holder...
  • Page 62 WHEN ORDERING PARTS, BE SURE TO STATE SERIAL NUMBER OF MACHINE...

  • Page 63: Clutch

    CLUTCH Ref. No. Part Number Description No. Req’d 012780-14 Clutch Rod 012780-13 Clutch Rod 031219 Clutch Lever 013027 Clutch Handle Pivot Plate 012012-06 Clutch Handle WHEN ORDERING PARTS, BE SURE TO STATE SERIAL NUMBER OF MACHINE...
  • Page 64 NOTE: (PUMP SWITCH & LOCAL REMOTE ARE OPTIONAL) WHEN ORDERING PARTS, BE SURE TO STATE SERIAL NUMBER OF MACHINE...

  • Page 65: Control Box Wiring

    CONTROL BOX WIRING Part Number Description No. Req’d 012952 Modified Control Box 012936 Modified Subpanel 190243 18-2 Can-Bus Cable 60" 012739 Murphy Powerview 170101 Deutsch Plug 170102 Deutsch Receptacle 170106 Deutsch 3 Pin Plug 170105 Deutsch Wedge Lock 170111 Deutsch 16 ga. Socket 170110 Deutsch 16 ga.
  • Page 66 BEARING & SEAL ASSEMBLY 2“ AGITATOR SHAFT THROUGH BACK SIDE NOTE: ITEM #1 (BEARING & SEAL ASSY) INLUDES ITEMS #2 - 9. APPLY (1) SOLID, CONTINUOUS BEAD OF SILICONE ADHESIVE AROUND OUTER EDGE ON THE INSIDE FACE OF THE CLAMPING RING BEFORE INSTALLATION.

  • Page 67: Agitator & Seal Assembly

    AGITATOR & SEAL ASSEMBLY Ref. No. Part Number Description No. Req’d 012529 Bearing and Seal Assembly 012527 Inner Clamping Ring w/Studs 1 per 012528 Agitator Shaft Seal 1 per 012525 Outer Clamping Ring 1 per 012451 Flangette 1 per 012450 2"...
  • Page 68 NOTE: ITEMS MARKED WITH AN ASTERIK (*) ARE PART OF #12956 HYDRAULIC HOSE & FITTING KIT WHEN ORDERING PARTS, BE SURE TO STATE SERIAL NUMBER OF MACHINE...

  • Page 69: Hydraulic System

    HYDRAULIC SYSTEM Ref. No. Part Number Description No. Req’d 011784 Filler Element 011868 Return Line Filter 011927 Suction Strainer 012044* Pressure Gauge 012086* Male Adapter 012287 2" Ball Valve 012309* Male Branch Tee Flare Tube 012580* Straight Male Adapter 012881 Auburn Gearbox 012891 Heat Exchanger...
  • Page 70 WHEN ORDERING PARTS, BE SURE TO STATE SERIAL NUMBER OF MACHINE...

  • Page 71: Hydraulic Agitator Drive

    HYDRAULIC AGITATOR DRIVE Ref. No. Part Number Description No. Req’d 012892 Hydraulic Motor 012881 Auburn Gearbox F400-0008 Torque Arrestor Plate 012522-02 Rubber Bushing 012522-04 Torque Arm Insert 012930 Torque Arm Weldment F400-0019 Coupling Guard 053023 2” x 2” ID Steel 2 Piece Coupling 012625 Splitcollar 012496-01...

  • Page 72: Ground Level Controls

    C G E F KEY SWITCH THROTTLE SWITCH PUMP BLU 3 SWITCH GRN 3 Not Used: ORG/BLK BLU/BLK GROUND LEVEL CONTROLS Ref. No. Part Number Description No. Req’d 012779 Ground Level Control Box 052076 Key Switch 023076 Key For KeySwitch FW71555 Toggle Switch 012759-02...

  • Page 73: Notes

    NOTES WHEN ORDERING PARTS, BE SURE TO STATE SERIAL NUMBER OF MACHINE...
  • Page 74 NOTE: ITEM #1 (HOSE REEL ASSEMBLY) INCLUDES ITEMS #2 - 10. WHEN ORDERING PARTS, BE SURE TO STATE SERIAL NUMBER OF MACHINE...

  • Page 75: Hose Reel Assembly

    HOSE REEL ASSEMBLY Ref. No. Part Number Description No. Req’d 008212 Hose Reel and Swivel Assembly 080302 Flanged Riser 008144 Hose Reel Gear 008200 Hose Reel Chain - 69" Lg. 008433 Pinlock w/Brackets Assembly 008313 Idle Side Bearing 008111B Brake Assembly 008314 Drive Side Bearing 008635...
  • Page 76 (Inside of Railing - Both Sides of Platform) (Both Sides) (Both Sides) RIGHT SIDE OF UNIT LEFT SIDE OF UNIT (Both Sides) WHEN ORDERING PARTS, BE SURE TO STATE SERIAL NUMBER OF MACHINE...

  • Page 77: Decals

    DECALS Ref. No. Part Number Description No. Req’d 012820 TITAN280/TITAN330/TITAN400 Decal Sheet 023174** "FINN" Decal 011595** "HydroSeeder®" Decal 012821 "Fall Hazard" Decal 011793 "3,000 Gallon" Decal (TITAN330 Only) 011792 "2,500 Gallon" Decal 011791 "2,000 Gallon" Decal 011790 "1,500 Gallon" Decal 005188 "1,000 Gallon"...

  • Page 78: Tool Kit

    Grease Gun (Hose Not Included) 012305 Adhesive Label (Removal Aerosol Can) 020365 Multi Puprose Grease 012681A FINN Beige Aerosol Paint 012681T FINN Beige Touch - Up Pait 006532 Coupler Gasket 3" 041371 3" Evertite Dust Cap-Brass 012992 Titan Nozzle Adapter Assembly 002427 Adapter 3"...

  • Page 79: Spare Parts List

    TITAN SPARE PARTS LIST Part Number Description No. Req’d 011784 Hydraulic Oil Filter 011869 Hydraulic Return Filter Element CU-LF3970 Oil Filter CU-FF5612 Fuel Filter 023910 Safetyu Air Filter 023076 Ignition Key 002439 3" Victaulic Pipe Gasket 006722 1-1/4" Victaulic Pipe Gasket 041368G 6"...

This manual is also suitable for:

Hydroseeder titan330Hydroseeder titan400

Table of Contents