Equipment - Binder redLINE RE 53 Operating Manual

Electrical connection data redLINE UL units (for USA and Canada):
Chamber type
Electrical data
Nominal voltage (±10%) 50/60 Hz
Nominal power
Nominal current
Power plug
Unit fuse 5 x 20 mm
250V / time-lag T
Temperature fuse class 1 (DIN 12880)
* up to 98 % of the set value
All technical data is specified for units with standard equipment at an ambient temperature of +25 °C /
77°F and a power supply voltage fluctuation of ±10. The temperature data is determined in accordance to
factory standard following DIN 12880, observing the recommended wall clearances of 10 % of the height,
width and depth of the inner chamber.
All indications are average values, typical for units produced in series. We reserve the right to
change technical specifications at any time.
If the chamber is fully loaded, the specified heating up times may vary according to the load.

14.5 Equipment

To operate redLINE chambers, use only original accessories or accessories / components
from third-party suppliers authorized by the manufacturer. The user is responsible for any risk
arising from using unauthorized accessories.
Chamber type
Standard equipment
Microprocessor temperature controller with LED display
Integrated timer, adjustable 0-9999 minutes
Temperature safety device class 1 acc. to DIN12880
Stainless steel interior equipped with 2 chrome-plated trays
Inner glass door
Exhaust duct, internal diameter 50 mm / 1.97 inches, with adjustable
ventilation slide
Redline Operating Manual RE / RF / RI 12/2010
RE 53- RE 115-
UL UL
100-120 100-120
V
V 1N~ V 1N~
kW 0.8 1.0
Amp 6,7 8,3
NEMA 5-15P 5-15P
Amp 10 10
external external
internal internal internal internal internal internal
RF 53- RF 115- RI 53-
UL UL UL
100-120 100-120 100-120
V 1N~ V 1N~ V 1N~
0.8 1.0 0.25
6,7 8,3 2,1
5-15P 5-15P 5-15P
10 10 10
external external external
RE RF
x
x
x
x
-- --
x
RI 115-
UL
100-120
V 1N~
0.3
2,5
5-15P
10
external
RI
x x
x x
x x
x x
x
x x
page 45/46