Control Panel; Scope Of Delivery, Transportation, Storage, And Installation19; Unpacking, And Checking Equipment And Scope Of Delivery - Binder redLINE RE 53 Operating Manual

2.3

Control panel

The control panel with the controller and the main power switch is located on the housing below the door.
Figure 6: redLINE control panel
3. Scope of delivery, transportation, storage, and installation
3.1

Unpacking, and checking equipment and scope of delivery

After unpacking, please check the redLINE chamber and its optional accessories, if any, based on the
delivery note for completeness and for transportation damage. If transportation damage has occurred,
inform the carrier immediately and have it confirmed on the proof of delivery by the vehicle driver who
delivers the equipment.
The final tests of the manufacturer may cause traces of the trays on the inner surfaces. This has no
impact on the function and performance of the unit.
Please remove any transportation protection devices and adhesives in/on the unit and on the doors and
take out the operating manuals and accessory equipment.
Sliding or tilting of the unit.
Damage to the unit.
Risk of injury by lifting heavy loads.
∅ Do NOT lift or transport a redLINE chamber using the door handle or the door.
Lift a redLINE chamber from the pallet at its four lower corners with the aid of 2 people.
In case of warranty please contact www.binder-redline.com.
For disposal of the transport packing, see chap. 12.1.
Redline Operating Manual RE / RF / RI 12/2010
(6)
(7)
(6) Controller
(7) Main power switch
CAUTION
page 19/46