Table of Contents
Advertisement
Bluetooth
1. Rotate the INPUT knob on the front panel or repeatedly press the
te controller to select the BT input. The word [BT] will be displayed on the Display.
2. Select Bluetooth
available Bluetooth
3. After a short time "HTR-1000CD" will appear on the screen of your audio source.
4. Select "Pair" on your audio source device to connect with the CD-Receiver.
After connection is successful the Bluetooth
and it will remain illuminated as long as the current connection is active.
Note! For elder audio source devices, you may need to input "0000" as a pairing password.
5. HTR-1000CD v.2 will now be ready to play your music wirelessly within a range of approxima-
tely 5 meters. Start playback on your audio source device.
6. You may control the playback on your audio source device or via the CD-Receiver.
Note! Not all audio sources may be controlled by the CD-Receiver.
• To pause/resume play, press ►ll.
• To skip to a track, press l◄◄ / ►►l on the front panel or ►l / l◄ on the remote controller.
• To stop play, press ■.
7. Press the PAIRING button for approximately 2 second to clear the Bluetooth
Note! Please refer to your audio source user instruction for details on operating the Bluetooth
Operation and names of specific functions may vary on different devices.
Important Notes - Bluetooth
1. When you want to use another Bluetooth
disconnect the active connection and start the Bluetooth
2. Make sure that there are no objects placed between an audio source and the CD-Receiver
obscuring the Bluetooth
3. This unit supports A2DP (Advanced Audio Distribution Profile).
Note! The above listed functionality may vary on different Bluetooth
nes, computers or other compatible devices).
For some audio source devices it may take a shorter or longer period of time to reconnect to the
CD-Receiver or it may even require to repeat the pairing procedure each time the Bluetooth
connection is lost.
Note! If your Bluetooth
connect to it then switch off, clear the pairing history and repeat the pairing procedure.
24
Connection
®
on your audio source device (smartphone, laptop etc.) and start scanning for
®
devices.
®
Connection
®
signal which may result in unstable or no connection.
®
audio source is not able to find the "HTR-1000CD" Bluetooth
®
Input Indicator will be illuminated continuously
®
audio source than currently active, you have to
®
connection procedure.
®
/ AUX button on the remo-
pairing history.
®
audio sources (smartpho-
®
device or
®
.
®
®
Advertisement
Table of Contents
