Rexroth IndraDyn A
9.6
Frame Shape and Installation Position
DOK-MOTOR*-MAD/MAF****-PR03-EN-P
IndraDyn A motors are available in frame shapes B05 and B35. Please
refer to the table below for the conditions of installation permissible
according to EN 60034-7.
Permissible conditions of installation
Motor
frame
shape
Description
IM B5
IM V1
B05
IM V3
IM B3
B35
IM B5
Fig. 9-6:
Installation positions
IndraDyn A motors in motor frame shape B35 can either be fixed by
means of foot assembly or flange assembly.
(1):
Flange for flange assembly
(2):
Assembly feet (both sides)
Fig. 9-7:
Mounting types of the IndraDyn A motors
Application Notes
Sketch
Setup
Flange mounting on
the drive end of the
flange
Flange attached on
the drive side of the
flange; drive side
pointing down
Flange attached on
the drive side of the
flange; drive side
pointing up
Foot installation
feet pointing down
Flange mounting on
the drive end of the
flange
IndraDynA_Befestigungsbohrungen.tif
9-5