5: Connecting The Ac Power Cord (Mains Lead); Preparing The Receiver; Initializing The Receiver - Sony STR-DH130 Operating Instructions Manual

5: Connecting the AC
power cord (mains lead)
Connect the AC power cord (mains lead) to a
wall outlet.
AC power cord (mains lead)
GB
18
To the wall outlet

Preparing the Receiver

Initializing the receiver

Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to revert back to the factory default
settings.
Be sure to use the buttons on the receiver to
perform this operation.
?/1
1
Press ?/1 to turn off the
receiver.
2
Hold down ?/1 for 5 seconds.
The "CLEARING" appears on the
display panel for a while, then changes to
"CLEARED".
Changes or adjustments made to the
settings are now reset to the defaults.