Viewing Information On The Display Panel - Sony STR-DH130 Operating Instructions Manual

If you made a mistake
Press B/b until the character you want to
change flashes, then press V/v to select
the correct character.
5
Press .
The name you entered is registered.
Viewing information on
the display panel
DISPLAY
1
Press the corresponding input
button which you want to check
the information.
2
Press AMP MENU, then press
DISPLAY repeatedly.
Each time you press the button, the
display changes cyclically as follows:
Index name of the input* t Selected
input t Volume level
When listening to FM and AM radio
Preset station name* t Frequency, band
and preset number t Volume level
When receiving RDS broadcasts
(Europe model only)
Program Service name or preset station
name* t Frequency, band and preset
number t Volume level
* Index name appears only when you have
assigned one to the input or preset station
(page 20, 25). Index name does not appear
when only blank spaces have been entered,
or it is the same as the input name.
Note
Character or marks may not be displayed for some
languages.
Input
buttons
AMP
MENU
GB
21