4: Connecting The Ac Power Cord - Sony STR-DB780 Operating Instructions Manual

4: Connecting the AC
power cord
FRONT SURROUND
L
R
PRE OUT
AC power cord
* Models of area code U, CA, SP, TW only.
The configuration, shape, and number of AC outlets
vary according to the model and country to which
the receiver is shipped.
Notes
• The AC OUTLET(s) on the rear of the receiver is a
switched outlet, which supplies power to the
connected component only while the receiver is
turned on.
• Make sure that the total power consumption of the
component(s) connected to the receiver's AC
OUTLET(s) does not exceed the wattage stated on
the rear panel. Do not connect high-wattage
electrical home appliances such as electric irons,
fans, or TVs to this outlet. This may cause a
malfunction.
GB
20
AC OUTLET
CENTER OUT
SUB
WOOFER
4 8
IMPEDANCE
SELECTOR
AC OUTLET
b
To a wall outlet
Performing initial setup
operations
Before using the receiver for the first time,
initialize the receiver by performing the
*
following procedure.
This procedure can also be used to return
settings you have made to their factory
defaults.
1
Press ?/1 to turn off the receiver.
2
Hold down ?/1 for 5 seconds.
"INITIAL" appears in the display.
The following are reset to their factory
settings.
• All settings in the SET UP,
CUSTOMIZE, SURROUND, LEVEL,
and EQ menus.
• The sound field memorized for each
function and preset station.
• All preset stations.
• All index names for functions and
preset stations.