5: Connecting Theac Power Cord(Mains Lead); Initializingthe Receiver - Sony STR-DH130 Operating Instructions Manual

5: Connecting theAC
power cord(mains lead)
Connect the AC power cord (mains lead) to a
wall outlet.
AC power cord (mains lead)
To the wall outlet
Initializingthe receiver
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to revert back to the factory default
settings.
Be sure to use the buttons on the receiver to
perform this operation.
ixb
I_ /2--,x
1
2
Press I/_) to turn off the
receiver.
Hold down I/_) for 5 seconds.
The "CLEARING" appears on the
display panel for a while, then changes to
"CLEARED".
Changes or adjustments made to the
settings are now reset to the defaults.
18_8