4: Connecting The Antennas (Aerials) - Sony STR-DH130 Operating Instructions Manual

Notes
• The default setting for the BD/DVD and VIDEO
input buttons on the remote control is as follows:
BD/DVD: Blu-ray Disc player
VIDEO: VCR
Be sure to change the default setting of the
BD/DVD (and VIDEO) input button so that you
can use the button to control your DVD player (and
DVD recorder). For details, see "Reassigning the
input button" (page 27).
• You can also rename the BD/DVD and VIDEO
input so that it can be displayed on the receiver's
display panel. For details, see "Naming inputs"
(page 20).
4: Connecting the
antennas (aerials)
Before connecting antennas (aerials), be sure
to disconnect the AC power cord (mains lead).
FM wire antenna (aerial)
(supplied)
AM loop antenna (aerial)
(supplied)
Notes
• To prevent noise pickup, keep the AM loop
antenna (aerial) away from the receiver and other
equipment.
• Be sure to fully extend the FM wire antenna
(aerial).
• After connecting the FM wire antenna (aerial),
keep it as horizontal as possible.
GB
17