Dbi/Pf Inspection - Canon BESTEM-D01/R Recognition Setting

BESTEM – D01R
5. DBI／Pf Inspection
When DBI/Pf Inspection button in recognition main screen is clicked, the following screen will be displayed
and DBI/AgP Inspection teaching can be done. Set according to ①～⑤ sequence. Set basic screen and
basic operation as in chip recognition.
⑧
⑤
④
②
①
DBI-Pf Inspection setting tab
(Item: Pf Base , Island Template , Pf Position/quantity )
* The contents of each item change by the change of Normal user/Super user.
②
SuperUser button
With SuperUser button, DBI-Pf inspection parameter setting tab can be change between Normal user and
super user. ※When DBI－Pf inspection setting tab is at super user, the button name will change from
SuperUser to NormalUser .
③
Apply button
Saves DBI/AgP Inspection parameter. If Return is clicked without clicking Apply button first, setting will
return to previously saved setting.
④
Rec exe button
Perform DBI-AgP inspection trace position. Check if the parameters are appropriate.
⑤ NGImage button
View DBI-Pfinspection most recent NG image
⑩
⑨
⑥
⑦
①
③
P．20