Canon BESTEM-D01/R Recognition Setting page 23

BESTEM – D01R
【NG mark setting tab】
When 「NG mark」 tab is clicked, a display as on the right will be
displayed.
1. "NG mark detect parameter setting"
① "NG mark detect" --- Set NG mark detection "ON/OFF"
during island recognition.
② "NG mark detect execution sequence" --- Set recognition
sequence during island recognition.
③ "NG mark detect position XY/size"ＷＨ[pixel] --- Set
NG mark detection position and range size.
④ "3 level setting"
obtain NG mark recognition pattern. When the scroll
bar is scrolled, the image will display the detection in
green color. The level is set when the NG mark is already
covered in green color
2. "NG mark detect tolerance" ---
allowable range. If the detected pixel is over the white
pixel count or black pixel count, Ng mark is detected.
--- Sets the 3 threshold level to
Sets NG mark detection
P．17