Canon BESTEM-D01/R Recognition Setting page 17

BESTEM – D01R
⑤
Digital zoom
This setting is use to zoom the image to obtain the image divided area which include the island size. (Setting range:
1 ~ 30 ) (Note 1)
⑥ Island position move button (Note 2)
It can be moved to the setting island position as in auto run mode.
Please specified the island no. that wish to be moved by pressing the UP/DOWN button.
⑦ Image move button (Unit: pixel) (Note 2)
Please teach to the first island center position.
(Note 1)
Eventhough the zoom setting can be done in REC EDIT screen, during island recognition and DBI chip inspection in
main screen, image zoom in 2 times or 3 times cannot be used.
For Pf recognition and DBI Pf inspection too, work size has the possibility cannot use image zoom in 2 times or 3 times.
(Note 2)
To change the image between odd and even column, please select "⑦ Island selection", then press Apply button. After
this, Odd, Even button is able to be selected for image changing.
P．11