Canon BESTEM-D01/R Recognition Setting page 14

BESTEM – D01R
【Chipping detect】
When「Chipping」tab is clicked, a screen as on the right will be displayed.
1. "Chipping detect parameter setting"
① "Chipping detect"
"Execute/No execute" during chip recognition.
②
"Chipping detect XY position inside pixel" --- Sets
chipping detection position during chip recognition.
Chip
③
"Chipping detect size"[pixel]
button is clicked, chipping detection range size is set.
Range size is the same at all chip 4 corners.
④
"3 level scale setting" ---
obtain the chipping recognition pattern.
2. "Chipping detect tolerance"---
allowable range at each 4 corners. If the detected pixel is
over the white pixel count or black pixel count, chipping is
detected.
--- Sets chipping detection
Y
Detection
X
window
--- When Setting
Sets "3 level setting" to
Sets chipping detection
P．8