Canon BESTEM-D01/R Recognition Setting page 25

Hide thumbs Also See for BESTEM-D01/R:
Table of Contents

Advertisement

BESTEM – D01R
Reference Figure) 1st chip detection for chip at outside image view.
Machine backward
※During 1st chip detection setting, the size of the image view when 1st chip inspection is set is the same as the
image view size when the island recognition template is set.
※The offset direction is only for Y direction.
2. "1st chip existence detect tolerance"
Set the total count for white and black pixel. If detected area is bigger than the allowable range, is
considered as chip exists.
Image view during setting 1st
chip detection
1st chip detection window
1st chip
Y Offset Setting
※Regarding polarity, if 1st chip is behind
the island (machine backward), setting is +
value. If 1st chip is in front of island
(machine frontward), the setting is - value.
Island
Image view during island
recognition template setting.
Machine front side
Actual captured image
P.19

Advertisement

Table of Contents
loading

Table of Contents