Canon BESTEM-D01/R Recognition Setting page 13

BESTEM – D01R
【NG mark detect】
When 「NG Mark」tab is clicked, the screen as on the right will
be displayed.
1. "NG mark parameter setting"
①
"NG mark detect"---
"Execute/No execute".
②
"NG pickup"
"Execute/No execute" during chip recognition.
③
"Forward REC NG mark detect"--- During chip
detection, sets NG mark detection "ON/OFF" at pre
recognition.
④ "Detect position XY/size" ＷＨ[pixel]
Setting button is clicked, NG mark detection
position and range size can be set.
⑤
"3 level scale setting" --- Sets the 3 threshold level
to obtain NG mark recognition pattern. When the
scroll bar is scrolled, the image will display the
detection in green color. The level is set when the NG
mark is already covered in green color
※ During scroll bar is scrolled, the gray scale
scanning inside the inspection window will be
displayed in histogram form. The horizontal axis
represent the gray scale level and vertical axis
represent the area (in pixel).
2. "NG mark detect tolerance" --- Sets NG mark detection allowable range. If the detected pixel is over the
white pixel count or black pixel count, Ng mark is detected.
Sets NG mark detection
--- Sets NG mark chip pick up
--- When
P．7