2.2 IVD Master Device Setup
2.2.1 IVD Master Front Panel Connection
All connections are made on the front panel of the IVD except power connector. The connections
on the front panel of the IVD are shown in Figure 2-2. There are some interfaces on Mater front
panel.
Factory Reset – A reset button is used to reset system, and then IVD will operate by default
configuration.
Alarm Relay – An alarm relay with RJ45 interface can connect to buzzer when the FAN is out of
order.
Console – A RS232 serial interface is used to connect a local management computer.
MGN – A management interface with RJ45 interface is for Telnet management. Users can set
local PC (personal computer) as the same subnet as IVD and to manage IVD by CLI command.
Figure 2-1. IVD network connections overview
31
Version: 1.5