Setting Maximum Volume - Phonak Roger NeckLoop User Manual

• The neck loop output is automatically switched off when
the headphones are attached (to save battery power).
• The volume will always start at a safe level. Use the volume
control to increase or decrease the volume (see page 20) if
needed.

5.2 Setting maximum volume

To ensure a comfortable listening level with headphones
at all times, the maximum allowable volume position can
be adjusted by activating the volume limiter.
Within 30 sec of startup:
1.
Adjust the volume to your liking.
2.
Use a pin tool to press the volume limiter button.
24