Tig Welding Options/Accessories; Recommended Equipment - Lincoln Electric WELDANPOWER 230+ Operating Manual

- Electric starting.
- Factory installed engine hour meter.
- Built-in feet for easy mounting to truck bed or trailer.
- All copper alternator windings and high quality insulation for
long life and dependability.
- Powder painted case and base for outstanding corrosion
protection.
ENGINE
Petrol
Briggs & Stratton 18HP V - twin Vanguard
- Air cooled, twin-cylinder.
- Cast aluminium alloy crankcase with integral cast iron
cylinder liners.
- Electric start with solid state battery charging module.
- Solid state breakerless ignition.
- Spin on oil filter
- Low oil pressure shutdown protection
- Battery charging ammeter.
- Engine protection shuts engine down in the event of low oil
pressure.
- Quiet muffler with reversible exhaust feature; either right or
left side of machine.
*
The trademark is the property of Briggs & Stratton
Diesel
Ruggerini - RD211 features:-
- Air cooled, twin cylinder.
- Direct injection.
- Crankcase in diecast aluminium.
- Forced lubrication with oil pump.
- Spin on oil filter.
- Centrifugal speed governor.
- Automatic mechanical fuel supplement.
OPTIONAL EQUIPMENT (Field Installed)
Lead Kit (KIT1400) - Includes 6m 25mm2 electrode cable and
4.5m 25mm2 work cable with one lug fitted to each.
Accessory Kit (KIT300) - Includes electrode holder, ground
clamp, Flip-front headshield, Supervisibility lens, non-spatter lens,
wire brush and chipping hammer.
Remote Control Receptacle Kit (K892-1) - Includes a 6-pin MS-
type (Amphenol) receptacle and a local- remote toggle switch that
mounts in the case front. Requires a Remote Control Option.
Remote Control (K857) - Consists of a control box with 8.5m of
four conductor cable. Permits remote adjustment of output.
(Requires K892-1 Remote Control Receptacle Kit to be mounted
in machine).

TIG WELDING OPTIONS/ACCESSORIES

K930-2 TIG Module - Provides high frequency and shielding gas
control for AC and DC GTAW (TIG) welding applications. Its
compact case is designed for easy carrying, complete with a
handle. High frequency bypass is built in. The K938-1 Contactor
Kit must be field installed in the TIG Module when used with a
Weldanpower 230+. Additionally, the K936-3 control cable is
required if remote control is used. If remote control is not used the
K936-4 control cable is required.
The TIG Module is supplied without accessories. Arc Start
switches, amptrols, cables, torches and mounting brackets must
IMA 572F
* features:-
®
Weldanpower 230+
be purchased separately.
K892-1 Remote Control Receptacle Kit - Required when using
a K930-2 TIG Module with an optional amptrol.
K939-1 Docking Kit - For mounting the K930-2 TIG Module on
top of the Weldanpower 230+.
K936-3 Remote Control Cable - Control cable for connecting the
K930-2 TIG Module to a Weldanpower 230+ equipped with a
K892-1 Remote Kit. 9-pin socket to a grounded 115V plug and a
6-pin MS-connector. (Contains circuits 2, 4, 31, 32, 75, 76, 77 and
ground).
K936-4 Remote Control Cable - Control cable for connecting the
K930-2 TIG Module to a Weldanpower 230+ not equipped with a
K892-1 Remote Kit. 9-pin socket to a grounded 115V plug and a
6-pin MS-connector. (Contains circuits 31, 32 and ground).
K814 Arc Start Switch - A remote start switch used in
conjunction with the K930-2 TIG Module to energise the
Weldanpower 230+ output terminals via the TIG module.
K963 Hand Amptrol - Remote output control on Weldanpower
230+.
K870 Foot Amptrol - Remote output control on Weldanpower
230+.

RECOMMENDED EQUIPMENT

Stick:
Accessory Kit (KIT1400) and Lead Kit (KIT300) which include:
- Electrode Holder & Cable
- Work Clamp & Cable
- Headshield and other necessary accessories.
Remote Control Receptacle Kit (K892-1), and Remote Control Kit
(K857) are optional for remote current control.
Tig:
Magnum™ TIG Torch
Magnum Parts Kit and Argon Gas
High Frequency Unit (K930-2) - (Limited Output Range)
(240 to 115V, 150VA, transformer is also required).
Optional:
- High Frequency Mounting Bracket (K939-1)
- Hand Amptrol® (K963)
- Foot Amptrol (K870)
- Remote Control Receptacle Kit (K892-1)
- Adaptor Cable (K936-3 or -4)
- Arc Start (K814)
Semi-Automatic:
LN-25 (K449) - Includes internal contactor for across the arc
operation (no control cable). Provides "cold" electrode until gun
trigger is pressed. Includes gas solenoid. Remote control
Receptacle Kit (K892-1) and Remote Voltage Control Kit (K444-1)
are required for voltage control at the feeder.
Page 7