Table of Contents
Advertisement
The Weldanpower 230+ is a twin-cylinder, petrol or diesel driven, multi-process arc welder and AC power generator. It is built in a heavy
gauge steel case for durability on the job site.
SPECIFICATIONS
Weldanpower 230+
Ordering
Information
Description
KA 1390
Multi-purpose
(Petrol)
Arc Welder with
8,000 watts of
KA1409-1
auxiliary power
(Diesel)
Engine - Petrol
Model
Description
Briggs &
2 Cylinder
Stratton
4 Cycle
Air Cooled
Petrol Engine
Aluminium Alloy with
Cast Iron Liners,
Electrical Ignition
Engine - Diesel
Model
Description
Ruggerini
2 Cylinder
RD 211
4 Cycle
Air Cooled Diesel with
Direct Injection
Diecast Aluminium
Crankcase
DESIGN FEATURES
AC/DC Stick Welding
(Constant Current)
-
AC: 30 - 230 Amps
-
DC: 30 - 210 Amps
-
100% Duty Cycle on All Settings
-
Output Selector with 6 Ranges
-
Output Control for Fine Current Adjustment
-
Use with a broad range of AC & DC Electrodes Including
Fleetweld® 5P
DC Semi-automatic Wire Feed Welding
(Constant Voltage)
-
CV Tap Setting for 40-200 Amps.
-
100% Duty Cycle
-
Excellent Performance with 1.7mm NR®- 211-MP
Innershield® Electrode.
-
Limited MIG Welding with L-54 & L-56 Ultra using
blended Argon Shielding Gas.
-
The recommended Wire Feeder is the LN-25, but can also
be used with the LN-22 Wire Feeder.
Page 6
GENERAL DESCRIPTION
Welding
Output
AC Constant Current
230A/25V/100%
DC Constant Current
210A/25V/100%
DC Constant Voltage
200A/20V/100%
Horsepower
Operating Speeds
13 kW
Full Load:
@ 3300 RPM
3200 RPM
High Idle
3300 RPM
Low Idle:
2200 RPM
Horsepower
Operating Speeds
13.3 kW
Full Load:
@ 3300 RPM
3200 RPM
High Idle:
3300 RPM
Low Idle:
2200 RPM
AC/DC TIG Welding (Constant Current)
-
Auxiliary Power
-
-
-
-
-
-
OTHER FEATURES
-
-
-
-
-
Weldanpower 230+
Auxiliary
Dimensions & Weight
Power
8000 Watts
1073 x 475 x 765mm
50/55Hz AC
Approx. 215 kg. (Petrol)
33 Amps @
240V
1260 x 490 x 767mm
Approx. 275 kg. (Diesel)
Displacement
570cc
Displacement
851cc
AC & DC TIG welding can be done at all constant current
output range settings.
8000 Watt AC 240 Volt 50/55 Hz. Generator.
Operates AC Power Tools.
Powers Battery Chargers.
Powers a 1.5 kW Motor (If started under no load).
Lights eighty (80) 100 watt incandescent bulbs.
Can be used for stand-by power.
Bottom mounted 34 litre fuel tank with a convenient top
fill and fuel gauge.
Polarity
switch
for
selecting
welding output.
K930-2 high frequency kit available.
Remote control receptacle kit available.
Electronic engine idler. Engine automatically goes to low
idle 10 to 14 seconds after welding or use of auxiliary
power ceases. Includes high idle switch.
(L x W x H)
Capacities
Fuel: 34L
Lubricating Oil:1.7L
Capacities
Fuel: 34 L
Oil: 3 L
DC+,
DC-,
or AC
IMA 572F
Advertisement
Table of Contents
