Lincoln Electric PRO-CUT 25 Operator's Manual
Hide thumbs
Also See for PRO-CUT 25:
- Service manual (87 pages) ,
- Operator's manual (54 pages) ,
- Operator's manual (29 pages)
Related Manuals for Lincoln Electric PRO-CUT 25
Summary of Contents for Lincoln Electric PRO-CUT 25
- Page 1 W83CExxx 07/2000 Rev.0 PRO-CUT OPERATOR’S MANUAL LINCOLN ELECTRIC ITALIA S.r.l Via degli Artigiani 80, 17015 Celle Ligure (SV), Italia www.lincolnelectric.com...
- Page 2 73/23/CEE, 9368/CEE, 89/336/CEE, 9231/CEE and has been designed in conformance with the following norms: EN 50192, EN 50199, EN 60529, EN 60974-1 Ing. Giovanni Pedrazzo Amministratore Delegato LINCOLN ELECTRIC ITALIA S.r.l., Via degli Artigiani 80, 17015 Celle Ligure (SV), Italia...
-
Page 3: Table Of Contents
ENGLISH INDEX Safety ................................4 Installation and Operator Instructions ......................5 PRO-CUT 25 Technical Specifications ......................7 Electromagnetic Compatibility (EMC) ......................9 Spare Parts ..............................10 Electrical Schematic............................. 11 Accessories ..............................12... -
Page 4: Safety
Failure to follow the instructions in this manual could cause serious personal injury, loss of life, or damage to this equipment.. Read and understand the following explanations of the warning symbols. Lincoln Electric Italia is not responsible for damages caused by improper installation, improper care or abnormal operation. -
Page 5: Installation And Operator Instructions
ELECTRIC AND MAGNETIC FIELDS MAY BE DANGEROUS: Electric current flowing through any conductor creates electric and magnetic fields (EMF). EMF fields may interfere with some pacemakers, and welders having a pacemaker should consult their physician before operating this equipment. CYLINDER MAY EXPLODE IF DAMAGED: Use only compressed gas cylinders containing the correct shielding gas for the process used and properly operating regulators designed for the gas and pressure used. -
Page 6: Output Connections
Compressed Air or Gas place error. A parts-in-place error means that a problem with the torch consumables has been Connection detected and the output of the machine has been A source of clean, dry air or nitrogen must be disabled. To correct this error, turn the machine supplied to the machine. -
Page 7: Pro-Cut 25 Technical Specifications
OFF and then ON again. Consumable Life The expected life for the Pro-Cut 25’s electrode Metal Thickness (mm) under normal operating conditions is approximately Shown here is the cutting capacity of the Pro-Cut 1000 starts/cuts. - Page 8 -25°C to +55°C For any maintenance or repair operations it is recommended to contact the nearest technical service center or Lincoln Electric Italia. Maintenance or repairs preformed by unauthorized service centers or personnel will null and void the manufacturers warranty.
-
Page 9: Electromagnetic Compatibility (Emc)
Lincoln Electric Italia. Do not modify this machine without the written approval of Lincoln Electric Italia. Before installing the machine, the operator must check the work area for any devices that may malfunction because of electromagnetic disturbances. -
Page 10: Spare Parts
Spare Parts English Item Part Number Description W9200041 Handle W7500012 Power Switch W870022R Knob W0700125 Front Nameplates W9398989 Frame W9398098 Cover W7917095 Work Cable and Clamp W78X0053 Input Cable W8460038 Cable Restraint W8400044 Plastic Foot W8800017 Air Regulator W8800018 Pressure Guage W8800019 Pressure Swtich W7200004... -
Page 11: Electrical Schematic
Electrical Schematic... -
Page 12: Accessories
Accessories W03X0170 Electrode (5 pieces) W03X0171 VORTECH Nozzle, 0.028in (5 pieces) W03X0172 Shield Cup (1 piece)