Table of Contents
Advertisement
Mapping TV stations
TO MOVE THE TV STATION TO ANOTHER CHANNEL
POSITION
EXAMPLE : Move the TV station from position 4 to position 6.
1
2
3
4
5
NOTE:
"WAIT" will blink on the screen whilst the
station is being moved.
20
Manual TV station presetting
The Auto CH Memory function (See
Manual station presetting
page 18) memorizes all broadcasts to
You activate the auto search function until your preferred station is
tuned in. Then you memorize this station into the chosen channel
the suitable CH positions by where
you done this function.
memory. For each station you repeat this procedure.
However one broadcast may not be
Preparation:
memorized depend on the bad receiv-
• Turn ON the TV and set to the video input mode.
ing condition. In case of these broad-
• Press VCR to select the VCR mode. (The VCR indicator will light.)
cast, use this tuning function.
Example: Preset one station on program position 5.
1
2
3
B/G will blink. Press
select [ B/G ], [ D/K ] or [ I ]. Then
press ENTER.
4
DEC OFF will blink. Press EN-
TER. DEC OFF does not blink
anymore. SEARCH will appear.
Note:
If you wish to store the PRE-
MIERE manually, the decoder
must have been connected as
Note:
on the lower of p.12.
Occasionally, the auto search might catch
During DEC OFF is blinking, press
a weak signal and stop. If the TV station
DEC ON will blink now.
signal is weak, you shouldn't store this
Press ENTER.
station.
In that case restart the auto search us-
ing
or
.
22
Press VCR MENU. Press
/
to select the CHANNEL SETUP,
then press ENTER.
Press
/
to select the CHANNEL MAPPING, then press
the ENTER.
Press
/
or
/
to select
CHANNEL MAPPING
the TV station to be moved.
1
5
2
6
3
7
4
8
SELECT
:
SKIP
: CANCEL
CHANGE NAME : 1
MOVE
: 2
EXIT
: MENU
MOVE CHANNEL
Press 2 of 10 number
1
5
buttons to select the MOVE
2
6
CHANNEL option.
3
7
4
8
POSITION
:
/
MOVE
: ENTER
EXIT
: MENU
Press
/
or
/
to select
MOVE CHANNEL
1
5
the position number to which
2
6
the selected TV station is to be
3
7
moved, then press ENTER.
4
8
Press VCR MENU to return to
POSITION
:
/
the normal screen.
MOVE
: ENTER
EXIT
: MENU
Press VCR MENU.
TIMER REC SET
Press
or
to select CHAN-
AUTO REPEAT
NEL SETUP. Then press EN-
VCR SETUP
CHANNEL SETUP
TER.
SYSTEM SETUP
SELECT :
ENTER : ENTER
EXIT
:
MENU
Press
or
to select CH
TUNING. Then press ENTER.
CHANNEL SETUP
CH TUNING
AUTO TUNING
CHANNEL MAPPING
SELECT :
ENTER : ENTER
EXIT
:
MENU
or
to
D/K
DEC OFF
SELECT :
OK
:
ENTER
D/K
DEC OFF
SELECT :
OK
:
ENTER
.
Skipping unwanted TV stations
(Skip those TV stations that are not
wanted to be selected by pressing the
CH+/–)
9
10
11
12
/
4
9
10
11
12
4
9
10
11
12
The Fine Tuning adjustment
Under a normal receiving condition, the
station-search will stops automatically at
the best receiving position. That picture
will appear without disturbance.
This receiving position will be memorized
automatically. The Fine Tuning cannot be
memorized additionally.
In rare case of bad receiving condition,
the station-search might not stop at the
best receiving position. That picture will
appear with disturbance, e.g. waving
[OFF]
lines.
Only in this rare case, use the Fine
Tuning to tune the concerned station
manually and exactly.
In step 6, press
is adjusted to best position. Then press
ENTER.
CH 1
EXIT :
MENU
CH 1
EXIT :
MENU
Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR to select the VCR mode. (The VCR indicator will light.)
1
Press VCR MENU. Press
to select CHANNEL SETUP.
Then press ENTER.
2
Press
or
to select CHAN-
NEL MAPPING. Then press
ENTER.
3
Press
/
or
/
edly until the TV station to be
skipped blinks.
4
Then press CANCEL.
The number before the canceled
channel (e.g. 12) will be
bracketed.
Canceling the skip function:
Press
/
or
/
edly until the skipped TV station
blinks, then press CANCEL.The
brackets will disappear.
5
Press VCR MENU repeatedly until the TV picture appears on
the screen.
Manual TV station presetting
5
Press
(rising frequency) or
search starts. It stops at each broadcast automatically
(" 1 " change to "
or
repeatedly until the
station you want appears. Only
in case of receiving of the weak
broadcast (drifting picture),
search dose not stop. If you
want to stop, press
/
.
6
Please wait until OK :ENTER
appears. It may take a few sec-
onds.
Then press ENTER.
or
until the station
In the next step, the program
position on which this station
should be stored will be set.
7
Press
or
repeatedly until
"5" displayed.
Or enter 5 with 10 number
buttons. Then press ENTER.
8
Repeat the steps 3 and 7 to preset other TV stations.
9
Press VCR MENU repeatedly until the TV picture appears on
the screen.
Mapping TV stations
or
TIMER REC SET
AUTO REPEAT
[OFF]
VCR SETUP
CHANNEL SETUP
SYSTEM SETUP
SELECT :
ENTER : ENTER
EXIT
:
MENU
CHANNEL SETUP
CH TUNING
AUTO TUNING
CHANNEL MAPPING
SELECT :
ENTER :
ENTER
EXIT
:
MENU
repeat-
CHANNEL MAPPING
1
5
9
2
6
10
3
7
11
8
4
12
SELECT
:
SKIP
:
CANCEL
CHANGE NAME
:
1
MOVE
:
2
EXIT
:
MENU
CHANNEL MAPPING
1
5
9
2
6
10
3
7
11
4
8
[12]
SELECT
:
SKIP
:
CANCEL
repeat-
CHANGE NAME
:
1
MOVE
:
2
EXIT
:
MENU
21
(falling frequency) once. The
"). Press
CH 1
D/K
DEC OFF
/
or
SEARCH :
/ F. TUNE :
EXIT
:
MENU
CH 1
D/K
DEC OFF
SEARCH :
/ F. TUNE :
OK
:
ENTER
EXIT :
MENU
CH 5
D/K
DEC OFF
CH
:
/ 0 9
OK
:
ENTER
EXIT :
MENU
23
Advertisement
Chapters
Table of Contents
Troubleshooting
