1-4: VCR DECK (Refer to Fig. 1-4)
NOTE
Do not remove the cable at the FE Head section. The FE
Head may be damaged if you remove the cable by force.
Remove the screw 1.
1.
2.
Remove the FE Head.
3.
Move the Cassette Holder Ass'y to the back side.
Remove the 3 screws 2.
4.
5.
Disconnect the following connectors:
(CP101, CP102, CP3001).
6.
Remove the VCR Deck in the direction of arrow.
1
FE Head
1-5: VCR PCB (Refer to Fig. 1-5)
Remove the screw 1.
1.
Remove the 3 screws 2.
2.
Remove the screw 3.
3.
4.
Remove the VCR PCB in the direction of arrow.
3
DISASSEMBLY INSTRUCTIONS
2
2
2
VCR Deck
VCR PCB
1
2
2
2
Fig. 1-4
Fig. 1-5
B1-2