Toshiba SD-25VLSR Service Manual page 35

2-14: CAPSTAN DD UNIT (Refer to Fig. 2-14)
1. Remove the Capstan Belt.
Remove the screw 1.
2.
3. Remove the Capstan Holder.
Remove the 3 screws 2.
4.
5. Remove the Capstan DD Unit.
2
2
• Screw Torque: 4 ± 0.5kgf•cm
2-15: MAIN CAM/PINCH ROLLER CAM/JOINT GEAR
(Refer to Fig. 2-15-A)
Remove the E-Ring 1, then remove the Main Cam.
1.
Remove the E-Ring 2, then remove the Pinch Roller
2.
Cam and Joint Gear.
NOTE
1. In case of the Pinch Roller Cam and Main Cam
installation, install them as the circled section of Fig. 2-
15-B so that the each markers are met. (Refer to Fig.
2-15-B)
DISASSEMBLY INSTRUCTIONS
Capstan Belt
1
Capstan Holder
Capstan DD Unit
2
Fig. 2-14
1
Main Cam
2
Pinch Roller Cam
Joint Gear
Fig. 2-15-A
Pinch Roller Cam
Marker
Main Cam
2-16: LOADING GEAR S/T UNIT (Refer to Fig. 2-16-A)
Remove the E-Ring 1 and remove the Main Loading
1.
Gear.
2. Remove the Main Rod, Tension Lever, Loading Arm S
Unit and Loading Arm T Unit.
Main Rod
Tension Lever
NOTE
1. When you install the Loading Arm S Unit, Loading Arm
T Unit and Main Loading Gear, align each marker.
(Refer to Fig. 2-16-B)
Main Loading Gear
Marker
Loading Arm T Unit
B2-5
Fig. 2-15-B
1
Main Loading Gear
Loading Arm T Unit
Loading Arm S Unit
Fig. 2-16-A
Marker
Loading Arm S Unit
Fig. 2-16-B