Connections; Connecting To A Tv - Toshiba SD-1600 Service Manual

Connections

Connecting to a TV

Connect the DVD video player to your TV.
For details of output sound, see
Connecting to a TV
Signal flow
VIDEO
To S VIDEO
OUT
To VIDEO
OUT
Notes
• Refer to the owner's manual of the connected TV as well.
• When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet
before making any connections.
• If your television set has one audio input, connect the DVD video player to a Y cable adapter (not supplied) and then connect
to your TV.
• Connect the DVD video player directly to your TV. If you connect the DVD video player to a VCR, TV/VCR combination or
video selector, the playback picture may be distorted as DVD video discs are copy protected.
16
.
33
VIDEO OUT
Y P P
B R
AUDIO OUT
R L BITSTREAM/
S
PCM
ANALOG
(yellow) (red) (white)
To ANALOG AUDIO OUT
S video cable (not supplied)
If the TV has an S video input, connect the
DVD video player with an S video cable.
When using an S video cable, do not
connect the yellow video cable.
Audio/video cable (supplied)
AC IN
To audio inputs
To video input
(red)
(yellow)
To S video input
TV or monitor with
audio/video inputs
• Make the following setting.
On-screen display Select:
"Audio Out Select" "Analog 2ch"
To wall outlet
(white)
Page
35
39