Connections; Connecting To A Tv; Connecting To A Tv (Using The Scart Socket); Connecting To A Tv (Using The Phono Type Jacks) - Toshiba SD-370EKB Owner's Manual

Connections

Connecting to a TV

Connect the DVD video player to your TV.

Connecting to a TV (Using the SCART socket)

Normal TV
To SCART input

Connecting to a TV (Using the phono type jacks)

Normal TV
To video To audio
input input
(yellow)
Audio/Video cables (supplied)
Notes
• Refer to the owner's manual of the connected TV as well.
• When you connect the DVD video player to your TV, be sure to turn off the
power and unplug both units from the wall outlet before making any connections.
• If your television set has one audio input, connect the left and right audio outputs
of the DVD video player to a Y cable adapter (not supplied) and then connect to
your TV.
• Connect the DVD video player directly to your TV. If you connect the DVD video
player to a VCR, TV/VCR combination or video selector, the playback picture
may be distorted as DVD video discs are copy protected.
• Analogue audio out will not have sound if DTS playback is selected.
22
• Make the following setting.
On-screen display
"Video Output"
SCART cable
(not supplied)
To 2ch To VIDEO
AUDIO OUT
OUT (yellow)
(R: red,
L:white)
Select:
Page
Composite
Component
RGB
32
P-Scan
HDMI
• Make the following setting.
On-screen display
"Digital Output"
"Video Output"
To wall outlet
To AV
To wall outlet
Select: Page
"PCM" or
33
"Bitstream"
Composite
Component 32
RGB
P-Scan
HDMI